AFRNDK
AFRNDK V1 Mini ETC ASIC Miner 300MH/s 240W With PSU
Ethereum Classic ASIC miner delivering 300 MH/s at 240 W with included PSU and Wi-Fi for home use
- TypeMining Machine/Miner
- Compatible Currencyetc
- Mining Hardwareasic
- Hashrate300MH/S
- Power Consumption240W
- Mines ETC at 300 MH/s with 240 W draw
- Power supply included for immediate home setup
- Wi-Fi connectivity simplifies network configuration
- Runs multiple Ethash coins including ZIL and ETP
- Optimal operation between 10 and 25 °C
What this miner is and who it suits
The AFRNDK V1 Mini is an ASIC miner rated at 300MH/s with a power draw of 240W. It targets the Ethash algorithm used by ETC, ZIL, ETP and EXP. A power supply is included, and the unit connects via Wi-Fi. The hardware is sold as used but tested and working. It is intended for home mining setups.
What the bundled PSU and Wi-Fi change
The included power supply removes the need to source a separate unit rated for 240W±10%. Wi-Fi connectivity lets the miner join a network without a wired Ethernet run, simplifying placement in a residential room. Both items are integrated into the package so the buyer can start mining after basic configuration.
What to check before ordering
Verify that the intended location stays between 10 and 25 degrees Celsius for best working temperature. Confirm the electrical circuit can sustain 240W continuous load with the stated tolerance. Ensure the mining pool and wallet support the listed coins and the Ethash algorithm.
Points forts
- Mines ETC at 300 MH/s with 240 W draw
- Power supply included for immediate home setup
- Wi-Fi connectivity simplifies network configuration
- Runs multiple Ethash coins including ZIL and ETP
- Optimal operation between 10 and 25 °C
Caractéristiques
| Brand | Ipollo |
|---|---|
| Model | v1 mini |
| Type | Mining Machine/Miner |
| Compatible Currency | etc |
| Mining Hardware | asic |
| Hashrate | 300MH/S |
| Power Consumption | 240W |
Questions sur cet article
Will the included power supply need replacement after continuous 240W ±10% operation?
The unit ships with a power supply built for the 240W ±10% draw; treat it as a consumable and plan a swap after extended non-stop use.
Does the 10 to 25 °C temperature window limit how long I can run the 300MH/s ±10% hashrate?
Sustained hashrate is stable only while intake air stays between 10 and 25 °C; above that the miner throttles to protect itself.
How loud and hot does the miner get when it runs all day at 240W ±10%?
Described as low-noise for home use; at 240W ±10% it emits modest heat and stays quiet enough for a living space.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



