ASRock
ASRock A320M-HDV AMD Motherboard MicroATX AM4
MicroATX AM4 board with A320 chipset, one PCIe 3.0 x16 slot and a single M.2 socket for DDR4 memory
- CPU Socket TypeAM4
- Form FactorMicroATX
- AM4 socket fits compatible AMD desktop processors
- A320 chipset delivers core platform functionality
- MicroATX form factor suits compact case builds
- One PCI Express 3.0 x16 slot accepts graphics cards
- Single M.2 slot enables fast storage upgrades
Socket AM4 MicroATX Board
The ASRock A320M-HDV is a MicroATX motherboard built for AMD Socket AM4 processors using the A320 chipset. It provides a single PCI Express 3.0 x16 slot and one M.2 slot alongside DDR4 memory support. The package includes the board and I/O shield only.
Upgrade From Older AMD Platforms
This board replaces an older AMD motherboard when you need AM4 socket compatibility and a MicroATX form factor. The jump is worth it if your current board lacks an M.2 slot or PCI Express 3.0 x16 connectivity for a modern graphics card. It is not for buyers who need multiple M.2 slots, additional PCIe expansion slots, or overclocking features not present on the A320 chipset.
Check CPU List And BIOS Needs
Verify your exact processor model against the manufacturer CPU compatibility list before ordering. Some supported CPUs may require a BIOS update that you must be able to apply using a compatible processor already installed. Confirm your chassis fits MicroATX and that your power supply provides the necessary connectors for this board layout.
Points forts
- AM4 socket fits compatible AMD desktop processors
- A320 chipset delivers core platform functionality
- MicroATX form factor suits compact case builds
- One PCI Express 3.0 x16 slot accepts graphics cards
- Single M.2 slot enables fast storage upgrades
Caractéristiques
| Brand | ASRock |
|---|---|
| Model | A320M-HDV |
| CPU Socket Type | AM4 |
| Form Factor | MicroATX |
Questions sur cet article
Will the MicroATX board fit my case and line up with the I/O shield?
The board uses the MicroATX form factor and ships with an I/O shield, so any case that accepts MicroATX will mount it correctly.
What is the most common mistake when seating the CPU in the AM4 socket?
Builders often forget to lift the retention arm fully before placing the processor, then force the lever down and bend pins.
Which parts will I need to replace if I add an M.2 drive later?
The board includes M.2 screws and a standoff, so only the drive itself is required.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



