ASUS
ASUS P9X79 EWS Intel X79 motherboard DDR3 64GB LGA 2011
Supports up to 64 GB of DDR3 memory on an LGA 2011 Intel X79 ATX board
- CPU Socket TypeLGA 2011
- ChipsetIntel X79
- Maximum Memory Supported64GB
- Supports up to 64GB DDR3 memory for demanding workloads
- Intel X79 chipset provides platform foundation for LGA 2011 CPUs
- ATX form factor fits standard desktop chassis builds
- Includes SATA cable and I/O back panel for immediate setup
- 100% inspected before shipment to verify working condition
ASUS P9X79 EWS Intel X79 Motherboard
The ASUS P9X79 EWS is a new ATX motherboard built around the Intel X79 chipset with an LGA 2011 socket. It supports DDR3 memory up to a maximum of 64 GB. The board is aimed at builders assembling a high-capacity workstation or enthusiast desktop on this platform.
Workstation Builders Using LGA 2011
This board suits users who need the X79 chipset and four-channel DDR3 support for memory-intensive tasks. It is not for builders who require a newer socket, a different chipset, or memory types other than DDR3. Buyers who want more storage interfaces than the provided SATA connections should look elsewhere.
64 GB DDR3 Maximum Memory
The single specification that decides fit is the 64 GB DDR3 memory ceiling. If your workload demands more than 64 GB or requires a memory generation beyond DDR3, this motherboard will not meet the requirement.
Points forts
- Supports up to 64GB DDR3 memory for demanding workloads
- Intel X79 chipset provides platform foundation for LGA 2011 CPUs
- ATX form factor fits standard desktop chassis builds
- Includes SATA cable and I/O back panel for immediate setup
- 100% inspected before shipment to verify working condition
Caractéristiques
| Brand | ASUS |
|---|---|
| Model | ASUS P9X79 EWS |
| CPU Socket Type | LGA 2011 |
| Chipset | Intel X79 |
| Maximum Memory Supported | 64GB |
Questions sur cet article
Does the Intel X79 chipset on this board cap DDR3 memory at 64GB?
Yes, the Intel X79 chipset on this ASUS P9X79 EWS board supports a maximum of 64GB of DDR3 memory.
What are the physical mounting requirements for this ATX motherboard?
This is a standard ATX form factor board requiring an ATX-compatible case with matching standoff holes and an I/O shield cut-out.
How is the motherboard installed and what step is commonly missed?
Install standoffs in the ATX pattern, mount the board, connect the 24-pin and CPU power cables, attach the supplied SATA cable, and fit the included I/O back panel — many builders forget the back panel until after the board is screwed down.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



