ASUS
ASUS TUF Gaming GeForce RTX 3080 O10G V2 graphics card
Delivers 10 GB GDDR6X on a 320-bit bus with 8704 CUDA cores and a 1785 MHz boost clock for 4K gaming
- InterfacePCI Express 4.0 x16
- Chipset ManufacturerNVIDIA
- GPU SeriesNVIDIA GeForce RTX 30 Series
- GPUGeForce RTX 3080
- Core Clock1440 MHz
- Boost ClockGaming Mode (Default): 1785 MHz
- 10 GB GDDR6X at 19 Gbps feeds 8704 CUDA cores
- PCIe 4.0 x16 interface removes bandwidth bottlenecks
- HDMI 2.1 and DisplayPort 1.4a drive 7680 x 4320 across four displays
- Triple-fan cooler with dual ball bearings sustains 1785 MHz boost clock
- Military-grade certification and 850 W PSU recommendation ensure stable operation
TUF Gaming RTX 3080 10GB GDDR6X Overview
The ASUS TUF Gaming RTX 3080 is a graphics card built on the NVIDIA GeForce RTX 30 Series architecture. It delivers 8704 CUDA cores and 10GB of GDDR6X memory across a 320-bit interface. The card connects via PCI Express 4.0 x16 and draws power through two 8-pin connectors. A triple-fan cooler with dual ball fan bearings handles thermal management.
Ideal for 4K Gaming and Creative Work
This card suits enthusiasts targeting high-refresh 1440p or 4K gaming with ray tracing enabled. Content creators benefit from the 10GB frame buffer and DirectX 12 Ultimate support for hardware-accelerated workflows. Users with power supplies below 850W or cases limited to dual-slot clearance should consider smaller models. The lack of SLI support also rules out multi-GPU scaling.
320-Bit Memory Bus Decides Fit
The 320-bit memory bus paired with 19 Gbps GDDR6X yields the bandwidth needed for 4K textures and compute loads. If your workload fits within 10GB VRAM, this bus width sustains the throughput the GPU requires. Builds needing more than 10GB for large scenes or AI batches must look at cards with larger memory configurations.
Points forts
- 10 GB GDDR6X at 19 Gbps feeds 8704 CUDA cores
- PCIe 4.0 x16 interface removes bandwidth bottlenecks
- HDMI 2.1 and DisplayPort 1.4a drive 7680 x 4320 across four displays
- Triple-fan cooler with dual ball bearings sustains 1785 MHz boost clock
- Military-grade certification and 850 W PSU recommendation ensure stable operation
Caractéristiques
| Brand | ASUS |
|---|---|
| Series | TUF Gaming |
| Model | TUF-RTX3080-O10G-V2-GAMING |
| Interface | PCI Express 4.0 x16 |
| Chipset Manufacturer | NVIDIA |
| GPU Series | NVIDIA GeForce RTX 30 Series |
| GPU | GeForce RTX 3080 |
| Core Clock | 1440 MHz |
| Boost Clock | Gaming Mode (Default): 1785 MHz |
| CUDA Cores | 8704 |
| Effective Memory Clock | 19 Gbps |
| Memory Interface | 320-Bit |
| Memory Type | GDDR6X |
| DirectX | DirectX 12 Ultimate |
| OpenGL | OpenGL 4.6 |
| Multi-Monitor Support | 4 |
| HDMI | 2 x HDMI 2.1 |
| DisplayPort | 3 x DisplayPort 1.4a |
| Max Resolution | 7680 x 4320 |
| SLI Support | No |
| Virtual Reality Ready | Yes |
| Cooler | Triple Fans |
| Recommended PSU Wattage | 850W |
| Power Connector | 2 x 8-Pin |
| HDCP Ready | 2.3 |
Questions sur cet article
How loud and hot does the triple-fan cooler get when the RTX 3080 runs at its 1785 MHz boost clock all day?
The triple-fan design uses dual ball bearings for durability, while the 850 W PSU recommendation reflects the thermal headroom needed for sustained 1785 MHz operation.
My PSU only has a single 8-pin cable — will the card work with an adapter or do I need a second native 8-pin connector?
The board requires two 8-pin power connectors; using an adapter on a single rail can trip over-current protection, so a PSU with two native 8-pin cables is strongly advised.
Will the PCI Express 4.0 x16 interface run at full speed on my older motherboard that only supports PCI Express 3.0?
Yes — the card is backward compatible and will operate at PCI Express 3.0 x16 speeds on a 3.0 motherboard with negligible impact on the 19 Gbps GDDR6X memory throughput.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



