ASUS
ASUS TUF Gaming GeForce RTX 3080 V2 OC Edition 10GB GDDR6X graphics card
10 GB GDDR6X graphics card with factory overclock to 1815 MHz, triple axial-tech fans on dual ball bearings, and PCIe 4.0 x16 interface
- InterfacePCI Express 4.0 x16
- Chipset ManufacturerNVIDIA
- GPU SeriesNVIDIA GeForce RTX 30 Series
- GPUGeForce RTX 3080
- Core Clock1440 MHz
- Boost ClockOC Mode: 1815 MHz Gaming Mode (Default): 1785 MHz
- Factory-overclocked boost to 1815 MHz lifts 4K frame rates
- 10 GB GDDR6X at 19 Gbps on a 320-bit bus feeds high-resolution textures
- Dual ball-bearing axial-tech fans and independent heatsinks keep thermals controlled
- PCIe 4.0 x16 and HDMI 2.1 plus DisplayPort 1.4a enable modern displays
- 850 W recommended PSU with dual 8-pin connectors supplies stable power
TUF Gaming RTX 3080 10GB OC
The ASUS TUF Gaming GeForce RTX 3080 V2 OC Edition is a full-length graphics card built on the NVIDIA Ampere architecture with 8704 CUDA cores and 10GB of GDDR6X memory on a 320-bit bus. It targets enthusiasts who want high frame rates at 4K resolution and need a card rated for 850W power supplies with dual 8-pin connectors. The PCIe 4.0 x16 interface and factory overclock to 1815 MHz in OC mode deliver strong out-of-the-box performance for demanding titles.
Upgrade from 8GB or older 3080
Moving from an 8GB card or a reference RTX 3080 makes sense when your current GPU cannot hold 4K textures or maintain high frame rates in modern titles. The 10GB frame buffer and 19 Gbps memory speed reduce stutter in memory-heavy workloads, while the boost to 1815 MHz adds measurable headroom over the 1710 MHz reference design. The LHR limiter keeps Ethereum hash rates near 43 MH/s, which may matter if you also mine.
Check case length PSU and ports
Verify your chassis can accommodate a 300 mm card and that your power supply provides two 8-pin PCIe connectors alongside the recommended 850W capacity. Ensure the motherboard has a PCIe 4.0 x16 slot for full bandwidth, though the card will run at PCIe 3.0 speeds if needed. Confirm your monitor uses HDMI 2.1 or DisplayPort 1.4a to match the card outputs.
Points forts
- Factory-overclocked boost to 1815 MHz lifts 4K frame rates
- 10 GB GDDR6X at 19 Gbps on a 320-bit bus feeds high-resolution textures
- Dual ball-bearing axial-tech fans and independent heatsinks keep thermals controlled
- PCIe 4.0 x16 and HDMI 2.1 plus DisplayPort 1.4a enable modern displays
- 850 W recommended PSU with dual 8-pin connectors supplies stable power
Caractéristiques
| Brand | ASUS |
|---|---|
| Series | TUF Gaming |
| Model | TUF-RTX3080-O10G-V2-GAMING |
| Interface | PCI Express 4.0 x16 |
| Chipset Manufacturer | NVIDIA |
| GPU Series | NVIDIA GeForce RTX 30 Series |
| GPU | GeForce RTX 3080 |
| Core Clock | 1440 MHz |
| Boost Clock | OC Mode: 1815 MHz Gaming Mode (Default): 1785 MHz |
| CUDA Cores | 8704 |
| Effective Memory Clock | 19 Gbps |
| Memory Size | 10GB |
| Memory Interface | 320-Bit |
| Memory Type | GDDR6X |
| Recommended PSU Wattage | 850W |
| Power Connector | 2 x 8-Pin |
| Max GPU Length | 300 mm |
| Card Dimensions (L x H) | 11.81" x 5.00" |
Questions sur cet article
How long is the card and will it fit my case?
The card measures 300 mm in length and 11.81 inches by 5.00 inches overall. Check your case clearance against these dimensions before buying.
Which power connectors does it need and how should they be routed?
It requires two 8-pin PCIe power connectors. Use separate cables from the PSU rather than a single daisy-chained cable to avoid voltage drop under load.
How do I clean the three axial-tech fans and their dual ball bearings?
Power off the system, hold each fan still with a finger, and blow dust out with compressed air. Do not spray lubricant on the dual ball bearings.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



