ASUS
ASUS TUF GAMING H570-PRO Intel motherboard LGA 1200 96GB DDR4 ATX
Intel H570 ATX motherboard for LGA 1200 CPUs with DDR4 memory up to 96GB
- CPU Socket TypeLGA 1200
- ChipsetIntel H570
- Maximum Memory Supported96GB
- LGA 1200 socket accepts compatible Intel CPUs
- Intel H570 chipset delivers platform features
- 96GB DDR4 capacity supports heavy multitasking
- ATX form factor fits standard cases
- Includes SATA cable for drive connectivity
Intel H570 ATX motherboard for LGA 1200 CPUs
The ASUS TUF GAMING H570-PRO is an ATX motherboard built on the Intel H570 chipset for LGA 1200 processors. It supports DDR4 memory up to 96 GB across its slots. The board ships with a chassis I/O shield and one SATA cable. It is intended for desktop builds that use this socket and chipset combination.
Suits builders using LGA 1200 processors
This board fits systems that require the H570 chipset and ATX form factor. It does not suit builds needing a different socket, a smaller form factor, or memory types other than DDR4. Buyers wanting integrated Wi-Fi, additional SATA cables beyond the one included, or original retail packaging should look elsewhere.
Maximum memory capacity of 96 GB DDR4
The 96 GB ceiling determines whether the board can meet the planned memory configuration. If the build calls for more than 96 GB, this motherboard will not support it. Verify the CPU and memory kit specifications against this limit before purchase.
Points forts
- LGA 1200 socket accepts compatible Intel CPUs
- Intel H570 chipset delivers platform features
- 96GB DDR4 capacity supports heavy multitasking
- ATX form factor fits standard cases
- Includes SATA cable for drive connectivity
Caractéristiques
| Brand | ASUS |
|---|---|
| Model | ASUS TUF GAMING H570-PRO |
| CPU Socket Type | LGA 1200 |
| Chipset | Intel H570 |
| Maximum Memory Supported | 96GB |
Questions sur cet article
What does the H570 chipset cap for maximum DDR4 capacity?
The H570 chipset supports up to 96GB of DDR4 memory across four slots.
What physical clearance does the ATX board need inside a chassis?
A standard ATX case with nine mounting holes and a matching I/O shield cut-out is required.
How is the board installed and which step is often missed?
Fit the I/O shield first, align the nine standoffs, secure the board, then connect the 24-pin and 8-pin power cables before adding any drives.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



