Axiom
Axiom 16GB DDR4 2933MHz CL21 Desktop RAM 4X70Z78725-AX
16 GB DDR4 module running at 2933 MHz with CL21 latency and Intel XMP 2.0 support
- BIOS/Performance ProfileIntel XMP 2.0
- 16 GB DDR4 module adds capacity for multitasking
- 2933 MHz DDR4 speed moves data quickly
- CL21 latency keeps response tight
- 288-pin DIMM fits standard desktop slots
- Intel XMP 2.0 profile enables simple setup
16GB DDR4 module for Lenovo P340 workstations
This 16GB DDR4 DIMM runs at 2933MHz with a CAS latency of CL21. It operates at the standard 1.20V voltage and uses an unbuffered signal design. The 288-pin form factor fits desktop PCs and workstations requiring DDR4-2933 memory.
Sustained operation at 2933MHz with CL21 timing
The module maintains its rated 2933MHz speed under continuous workloads thanks to standard DDR4 voltage and unbuffered architecture. Intel XMP 2.0 support allows the system BIOS to apply the validated profile automatically. RoHS certification confirms the components meet environmental substance restrictions for long-term deployment.
DDR4-2933 standard limits bandwidth to PC4-23466
The DDR4-2933 interface caps theoretical maximum throughput at the PC4-23466 data rate. Unbuffered signal processing means the memory controller manages timing directly without a register buffer. This module is validated for the Lenovo P340 Tower ThinkStation; other platforms may require separate compatibility verification.
Points forts
- 16 GB DDR4 module adds capacity for multitasking
- 2933 MHz DDR4 speed moves data quickly
- CL21 latency keeps response tight
- 288-pin DIMM fits standard desktop slots
- Intel XMP 2.0 profile enables simple setup
Caractéristiques
| BIOS/Performance Profile | Intel XMP 2.0 |
|---|
Questions sur cet article
How much heat does the 1.20 V DDR4 module generate under continuous load?
At 1.20 V the module runs cool; unbuffered DDR4 at this voltage produces minimal heat even during all-day workloads.
Does the 288-pin DIMM require an XMP 2.0-capable motherboard to reach 2933 MHz?
Yes, the board must support Intel XMP 2.0 to enable the rated 2933 MHz speed; otherwise it will fall back to a lower JEDEC frequency.
Will the CL21 2933 MHz sticks work alongside slower DDR4 already installed?
They will run at the speed and latency of the slowest module present, so mixing with slower DDR4 is stable but reduces overall bandwidth.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



