BGears
BGears b-Vigor550W 550W ATX power supply
Delivers 550 W through a compact 150 mm non-modular ATX design with 80+ efficiency at 20, 50 and 100 percent load and full-range 115 to 230 V input
- ColorBlack
- TypeATX
- Maximum Power550 W
- Max PSU Length150 mm
- ModularNon-Modular
- 550 W maximum power supports mid-range builds
- 150 mm length fits most standard cases
- 80+ efficiency at 20, 50 and 100 percent load reduces waste heat
- full range 115 V to 230 V input works worldwide
- over power and short circuit protection guards components
What this power supply delivers
The BGears b-Vigor550W is a 550 W ATX unit with a compact 150 mm depth and a non-modular cable set. It accepts full-range AC input from 115 V to 230 V and meets over 80 % efficiency at 20 %, 50 % and 100 % load. Over-power and short-circuit protection are built in, and the product carries CE and RoHS markings. It suits builders who need a straightforward, fixed-cable supply for a mid-range system.
Who should consider a different unit
This model fits standard ATX cases that can accommodate a 150 mm deep PSU and works well for single-GPU builds with moderate power draw. Builders who prefer modular cabling for easier routing, or who need higher wattage for multi-GPU configurations, should look at other options. The non-modular design means every cable stays attached, which can limit flexibility in tight chassis layouts.
Installation notes and common issues
The 150 mm length helps it fit most mainstream cases, and the fixed cables eliminate the risk of loose modular connectors. Because all cables are permanently attached, cable management depends on case routing space and tie-down points. The main installation friction comes from stowing unused cables cleanly, especially in smaller enclosures where excess length has nowhere to go.
Points forts
- 550 W maximum power supports mid-range builds
- 150 mm length fits most standard cases
- 80+ efficiency at 20, 50 and 100 percent load reduces waste heat
- full range 115 V to 230 V input works worldwide
- over power and short circuit protection guards components
Caractéristiques
| Brand | Bgears |
|---|---|
| Series | b-Vigor550W |
| Model | b-Vigor550W |
| Part Number | b-Vigor550W |
| Color | Black |
| Type | ATX |
| Maximum Power | 550 W |
| Max PSU Length | 150 mm |
| Modular | Non-Modular |
| Poids d’expédition | 1.45 kg |
| Dimensions du colis | 229 × 159 × 102 mm |
Questions sur cet article
What case depth do I need to fit the 150 mm long b-Vigor550W?
Your case must accept power supplies up to 150 mm in length; measure the clearance from the rear panel to the nearest drive cage or motherboard tray.
Will the non-modular cables reach the motherboard and GPU in a standard ATX tower?
Fixed-length leads are sized for typical ATX layouts; route the 24-pin, CPU and PCIe connectors along the cable-management channels.
How can I confirm the unit is delivering its rated 550 W after installation?
Under load the fan should spin and voltages on the 24-pin and PCIe rails must stay within ATX tolerance; a hardware monitor or multimeter can verify this.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



