Computer Memory Solutions
Computer Memory Solutions 16GB DDR5 4400MHz CL40 2Rx8 1.1V memory upgrade
16GB DDR5 4400MHz CL40 unbuffered DIMM with 2Rx8 rank and 1.1V operation
- Capacity16GB
- SpeedDDR5 4400 (PC5 35200)
- CAS Latency40
- Timing40-40-40-96
- Voltage1.1V
- ECCNo
- 16GB DDR5 capacity for demanding workloads
- 4400MHz speed enables fast data throughput
- CL40 40-40-40-96 timings for responsive operation
- 1V operation reduces power draw
- 288-pin unbuffered DIMM fits standard desktop slots
Capacity and fit
This 16 GB DDR5 module runs at 4400 MHz with CL40 timings and 1.1 V operation. It uses a 288-pin unbuffered DIMM form factor and a 2Rx8 rank structure. The kit contains a single piece built with a major brand chipset.
Speed grade
The decisive figure is DDR5-4400 (PC5-35200) at CL40-40-40-96. All installed memory will run at the slowest module or the processor limit, so matching this exact speed grade matters for consistent performance.
Installation notes
Insert the DIMM into a compatible DDR5 slot until the retaining clips click. A 64-bit operating system is required to address more than 4 GB. Mixing with slower modules forces the whole system down to the lowest common speed.
Points forts
- 16GB DDR5 capacity for demanding workloads
- 4400MHz speed enables fast data throughput
- CL40 40-40-40-96 timings for responsive operation
- 1V operation reduces power draw
- 288-pin unbuffered DIMM fits standard desktop slots
Caractéristiques
| Part Number | CM2048644400DIMM |
|---|---|
| Capacity | 16GB |
| Speed | DDR5 4400 (PC5 35200) |
| CAS Latency | 40 |
| Timing | 40-40-40-96 |
| Voltage | 1.1V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
Questions sur cet article
What does the 4400MHz speed mean once the module is installed in a real machine?
The module runs at 4400MHz if the platform supports DDR5-4400; otherwise it downclocks to the highest speed the CPU and motherboard allow.
What does the DDR5-35200 (PC5-35200) rating cap in practice?
It sets a peak transfer rate of 35200MB/s, but the actual throughput is limited by the memory controller and motherboard capabilities.
What does the 288-pin DIMM need to fit or mount?
It requires a standard DDR5 288-pin DIMM slot on the motherboard.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



