Computer Memory Solutions
Computer Memory Solutions CM10246410600SODRH 32GB (4x8GB) DDR3 1333MHz memory upgrade
32 GB kit of four 8 GB DDR3 1333 MHz SO-DIMM modules for the 27-inch 2011 iMac
- Capacity32GB (4 x 8GB)
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- Timing9-9-9
- Voltage1.5V
- 32 GB total capacity across four 8 GB modules for full iMac upgrade
- DDR3 1333 MHz (PC3-10600) speed matches original specification
- CL9 9-9-9 timing at 1.5 V for stable operation
- 204-pin non-ECC unbuffered SO-DIMM fits the 27-inch Mid-2011 iMac
- Manufacturer guarantees compatibility with iMac12,2 A1312 (Mid-2011)
32GB DDR3 1333MHz kit for Mid-2011 iMac
This 32GB kit contains four 8GB DDR3 1333MHz SO-DIMM modules built to the PC3-10600 standard. It is designed specifically for the 27-inch iMac with a 3.4 GHz Core i7 processor released in mid-2011. The unbuffered, non-ECC memory operates at 1.5V with CL9 timing.
Suits owners of the identified iMac model
The kit matches the exact specifications required by the Apple iMac "Core i7" 3.4 27-Inch (Mid-2011), including the 204-pin form factor and 2Rx8 rank structure. Systems that require ECC registered modules, a different pin count, or a voltage other than 1.5V will not be compatible with this memory.
Four-module 204-pin SO-DIMM configuration
The package provides four sticks to fill all four memory slots in the supported iMac, reaching the maximum 32GB capacity. Each module uses major-brand chips in a 2Rx8 organisation. Installing a different number of modules or a different pin layout would prevent proper operation in this system.
Points forts
- 32 GB total capacity across four 8 GB modules for full iMac upgrade
- DDR3 1333 MHz (PC3-10600) speed matches original specification
- CL9 9-9-9 timing at 1.5 V for stable operation
- 204-pin non-ECC unbuffered SO-DIMM fits the 27-inch Mid-2011 iMac
- Manufacturer guarantees compatibility with iMac12,2 A1312 (Mid-2011)
Caractéristiques
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM10246410600SODRH |
| Capacity | 32GB (4 x 8GB) |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Timing | 9-9-9 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Apple Imac "Core I7" 3.4 27-Inch (Mid-2011) |
| Package Content | 4 Memory RAM Sticks |
Questions sur cet article
What speed does the DDR3 1333 MHz SO-DIMM run at in this iMac?
The kit is rated PC3-10600 at 1333 MHz CL9; the Mid-2011 27-inch iMac memory controller locks DDR3 to 1333 MHz, so the modules operate at their rated speed.
Will these 204-pin SO-DIMMs fit the four slots in the Mid-2011 27-inch iMac?
Yes — the system has four SO-DIMM sockets and the kit supplies four 204-pin unbuffered non-ECC modules that match the Apple iMac12,2 / A1312 slot layout.
How do I install the four sticks and what step is commonly missed?
Power off and unplug the iMac, lay it face-down on a soft cloth, remove the bottom memory-access door, eject any existing modules, insert all four 8 GB sticks until they click, replace the door, then reconnect power — the step often missed is fully seating both ends so the retention clips snap shut.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



