Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter

COOLMOON

COOLMOON Sunshine R6-120 6pcs RGB PWM Case Fans 120mm 1400 RPM 37.8 CFM 25 dBA Hydraulic Bearing Black

SKU CH-XN9D-8Y4SS

Six 120 mm PWM fans deliver 37.8 CFM each at up to 1400 RPM while running at 25 dBA, with dual-loop RGB lighting offering 366 modes controlled via an RF remote and hub

  • Fan Counts6 Fans
  • TypeCase Fan
  • CompatibilityCase
  • Fan Thickness25mm
  • Bearing TypeHydraulic
  • RPM0 - 1400 RPM
  • Six fans deliver 37.8 CFM each for strong case airflow
  • Hydraulic bearing keeps noise at 25 dBA during operation
  • Dual light loops on every fan create 366 RGB modes
  • RF remote controls lighting and colours without software
  • PWM 4-pin connector allows 0 to 1400 RPM speed control

Six-fan RGB kit with remote hub

The COOLMOON Sunshine R6-120 kit supplies six 120 mm case fans that spin up to 1400 RPM and move 37.8 CFM each. Hydraulic bearings and rubber pads keep noise as low as 16 dBA under typical load. A 6-pin hub and RF remote let builders control 366 lighting modes without opening the case. All fans share a black frame and dual light loops for front-and-back illumination.

Fits standard 120 mm mounts with 25 mm depth

Each unit uses a 4-pin PWM connector for motherboard speed control while the hub handles RGB power and remote signals. The 6-pin interface is rated for up to 1500 RPM operation, giving headroom above the stock 1400 RPM limit. Connect fans sequentially from socket one to avoid units spinning without light. No additional controller or software is required for basic operation.

Delivers 37.8 CFM per fan at 25 dBA peak

Six fans combine for strong case throughput while staying quiet at the rated 25 dBA ceiling. The hydraulic bearing and silica-gel blades minimise vibration transfer to the chassis. Builders seeking higher static pressure for dense radiators or extreme overclocking headroom will need fans with different blade geometry and higher pressure ratings.

Points forts

  • Six fans deliver 37.8 CFM each for strong case airflow
  • Hydraulic bearing keeps noise at 25 dBA during operation
  • Dual light loops on every fan create 366 RGB modes
  • RF remote controls lighting and colours without software
  • PWM 4-pin connector allows 0 to 1400 RPM speed control

Caractéristiques

BrandCOOLMOON
SeriesSunshine
ModelR6-120
Fan Counts6 Fans
TypeCase Fan
CompatibilityCase
Fan Thickness25mm
Bearing TypeHydraulic
RPM0 - 1400 RPM
Air Flow37.8 CFM +/- 10%
Noise Level25 dBA +/- 10%
Power Connector4 Pin
ColorBlack
LEDRGB
FeaturesEach RGB fan is equipped with two independent light loops, having great light coverage on both front and back side. this rgb led fan provide up to 366 lighting modes of automated cycle play and dynamic multicolored effects
Built with RF Wireless Remote Controller, the case fan is easy to remote control on/off, and enables users easily to select preferred RGB lighting effects and colors(Note: Fan speed not controllable). Aslo the 2 pin reset switch on the controller hub be able to replace the reset button on your case to change fan colors.
The 120mm case fans featured with nine-page s

Questions sur cet article

How long before the hydraulic bearing reaches its 1400 RPM limit under continuous load?

The hydraulic bearing is rated for 0 to 1400 RPM and delivers 37.8 CFM at full speed, so sustained operation stays within that ceiling.

What noise and heat output should I expect when all six fans run at maximum speed all day?

At 1400 RPM each fan produces 25 dBA and 37.8 CFM; the hydraulic bearing and rubber pads keep vibration low, with the manufacturer noting noise can drop below 16 dBA at lower speeds.

Which motherboard headers and case features must I already have to install and control this six-fan kit?

You need a 4-pin PWM header for power, a 6-pin hub connection for the RGB controller, and a spare 2-pin reset-switch header if you want the case button to change lighting modes.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.