Crucial
Crucial Ballistix 8GB DDR4 3000MHz CL15 1.35V Red
An 8 GB DDR4 module running at 3000 MHz with CL15 timing, 1.35 V operation, a red anodised aluminium heat spreader and XMP 2.0 support
- CAS LatencyCL15
- Voltage1.35 V
- Capacity8GB
- SpeedDDR4 3000 (PC4 24000)
- Red anodized aluminum heat spreader keeps modules cool
- 16 RGB LEDs in 8 zones let you customize lighting
- XMP 2.0 profiles enable one-click overclocking
- Low 1.35 V voltage reduces power draw
- 3000 MHz DDR4 speed with CL15 latency boosts responsiveness
Single 8GB DDR4 module for compact builds
This Crucial Ballistix stick delivers 8GB of DDR4 memory at 3000MHz with CL15 timings. It targets builders who want a single red module for a small-form-factor desktop or a secondary upgrade slot. The low-profile heat spreader fits tight clearances where taller kits would not.
288-pin DIMM with XMP 2.0 and 1.35V operation
The module plugs into a standard DDR4 slot and draws 1.35V, reducing power draw compared to higher-voltage kits. XMP 2.0 support lets the BIOS apply the rated 3000MHz profile without manual tuning. No extra cables or controllers are required for the memory itself.
Anodized aluminium spreader sustains rated speed
Sixteen RGB LEDs across eight zones add lighting while the aluminium spreader moves heat away from the DRAM during extended sessions. The combination keeps the module at its advertised 3000MHz CL15 setting through prolonged workloads rather than throttling after a short burst.
Points forts
- Red anodized aluminum heat spreader keeps modules cool
- 16 RGB LEDs in 8 zones let you customize lighting
- XMP 2.0 profiles enable one-click overclocking
- Low 1.35 V voltage reduces power draw
- 3000 MHz DDR4 speed with CL15 latency boosts responsiveness
Caractéristiques
| CAS Latency | CL15 |
|---|---|
| Voltage | 1.35 V |
| Capacity | 8GB |
| Speed | DDR4 3000 (PC4 24000) |
| Brand | Crucial |
| Model | BL8G30C15U4R |
Questions sur cet article
Will this single 8 GB module run at 3000 MHz on my motherboard without manual BIOS changes?
The module includes an XMP 2.0 profile rated for 3000 MHz CL15 at 1.35 V; enable XMP in the BIOS to activate those timings automatically.
Does the red anodized heat spreader add enough height to interfere with larger CPU air coolers?
The low-profile design keeps the module close to the PCB, so it clears most tower coolers, but verify your cooler’s RAM clearance spec before ordering.
Can I add a second identical stick later to run dual-channel without buying a matched kit?
Yes, purchasing another BL8G30C15U4R with the same speed, voltage and latency will allow dual-channel operation when installed in the correct motherboard slots.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



