Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Black mid-tower ATX case with mesh front and side panels, vertical GPU mount, seven 120mm fans

DARKROCK

DARKROCK Classico Storage Master ATX NAS PC Case 10×3.5" 3×2.5" 7×120mm Fans Black

SKU CH-AV3N-H7PND

An ATX mid-tower case holding ten 3.5-inch and three 2.5-inch drives with seven 120 mm fans, mesh panels, vertical GPU mounting and 360 mm radiator support

  • TypeATX Mid Tower
  • ColorBlack
  • Motherboard CompatibilityMicro ATX / ATX / ITX
  • Dust FiltersYes
  • Expansion Slots7
  • Max GPU Length400 mm
  • Thirteen drive bays give massive NAS storage capacity
  • Seven pre-installed 120 mm fans deliver strong airflow out of the box
  • Mesh front and side panels feed cool air directly to components
  • Vertical GPU mounting prevents sag and showcases the card
  • 360 mm radiator support enables high-performance liquid cooling

Storage-focused ATX mid-tower

The DARKROCK Classico Storage Master is an ATX mid-tower built around thirteen drive bays. It accepts ten 3.5-inch and three 2.5-inch drives, plus Micro-ATX and ITX boards. Seven expansion slots and a 400 mm GPU limit suit storage servers and media workstations that need dense local capacity.

Mesh panels and vertical GPU mount

Mesh front and side panels feed airflow to the seven included 120 mm fans and dust filters. A vertical GPU mounting bracket prevents sag on long cards while keeping the cooler in the direct airstream. Front-panel USB 3.0 gives quick access to external drives without reaching the rear I/O.

360 mm radiator support and thermal headroom

Top and front mounts each accept a 360 mm radiator for liquid-cooling the CPU. CPU cooler clearance reaches 160 mm and the PSU tunnel fits units up to 200 mm long. The open mesh layout and high fan count keep component temperatures low without relying on a single restrictive path.

Points forts

  • Thirteen drive bays give massive NAS storage capacity
  • Seven pre-installed 120 mm fans deliver strong airflow out of the box
  • Mesh front and side panels feed cool air directly to components
  • Vertical GPU mounting prevents sag and showcases the card
  • 360 mm radiator support enables high-performance liquid cooling

Caractéristiques

TypeATX Mid Tower
ColorBlack
Motherboard CompatibilityMicro ATX / ATX / ITX
Dust FiltersYes
Expansion Slots7
Max GPU Length400 mm
Max CPU Cooler Height160 mm
Max PSU Length200 mm

Questions sur cet article

Does the USB 3.0 front panel run at the full 5 Gbit/s or is it limited by the internal header?

The case provides a USB 3.0 front port that connects to a standard motherboard header; actual throughput depends on the header and controller on your board.

What clearance do I need for a 360 mm radiator on the top or front?

The chassis supports a 360 mm radiator in both positions; ensure your motherboard and CPU cooler leave enough room above the top mounting points.

How do I install a graphics card vertically and which bracket do I use?

Use the included vertical GPU mount bracket, secure it to the rear expansion slots, then attach the card with a PCIe riser cable — seat the riser firmly before tightening the bracket.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.