DATO
DATO FF2D532G6400HC32ADC01 32GB (2×16GB) DDR5 5600MHz CL46 1.1V desktop RAM
A 32GB dual-channel DDR5 kit running at 5600MHz with CL46 latency and 1.1V operation for desktop systems
- CAS LatencyCL46
- Voltage1.1 volts
- TimingCL46
- Capacity32GB (2 x 16GB)
- Speed5600 MHz
- ECCNon-ECC
DDR5 UDIMM 32GB Kit - 16GBx2
- 32GB Kit - 16GBx2
- 64GB Kit - 32GBx2
Les versions barrées existent, mais ne sont pas disponibles ici.
- 32 GB dual-channel kit gives headroom for heavy multitasking
- 5600 MHz DDR5 speed enables fast data transfer rates
- 1 V operating voltage reduces power draw and heat
- On-module PMIC delivers stable and efficient power management
- Non-ECC unbuffered 288-pin UDIMM fits standard desktop slots
Kit Capacity and Speed
This DATO kit supplies 32GB of DDR5 desktop memory as two 16GB modules running at 5600MHz with CL46 timing. The 288-pin UDIMM sticks operate at 1.1V and are non-ECC unbuffered units built for dual-channel platforms.
Who This Suits
Builders upgrading a DDR5-capable desktop to 32GB will find the speed and voltage match mainstream board defaults. Systems that require ECC, registered modules, lower latency or higher frequencies should consider different memory.
Sustained Load Behaviour
On-module power management regulates voltage across the modules during extended workloads to maintain stable operation. The 1.1V design limits heat output so performance remains consistent without active cooling on the memory itself.
Points forts
- 32 GB dual-channel kit gives headroom for heavy multitasking
- 5600 MHz DDR5 speed enables fast data transfer rates
- 1 V operating voltage reduces power draw and heat
- On-module PMIC delivers stable and efficient power management
- Non-ECC unbuffered 288-pin UDIMM fits standard desktop slots
Caractéristiques
| CAS Latency | CL46 |
|---|---|
| Voltage | 1.1 volts |
| Timing | CL46 |
| Capacity | 32GB (2 x 16GB) |
| Speed | 5600 MHz |
| ECC | Non-ECC |
| Buffered/Registered | Unbuffered |
| Features | DDR5 UDIMM desktop Memory 32GB Kit (2 x 16GB) 5600MHz Speed, PC5-44800 1.1V Low Voltage Design Non-ECC, Unbuffered Dual Channel Support Stability Tested |
| Brand | DATO |
| Model | DT16G5DU56X2 |
Questions sur cet article
Does this kit need a motherboard with DDR5 slots to install?
Yes, the modules are DDR5 UDIMMs with 288 pins and require a DDR5-compatible motherboard.
Can I run these 5600MHz modules alongside my existing DDR4 memory?
No, DDR5 and DDR4 use different physical slots and cannot be mixed on the same board.
How can I confirm the kit is running at 5600MHz with CL46 after installation?
Check the memory tab in CPU-Z or the BIOS main screen; it should show 5600MHz and CL46 timings.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



