DELL
DELL 400-AJPD 1.2TB 10000RPM SAS 2.5" internal hard drive
A 1.2 TB 10000 RPM SAS internal hard drive in a 2.5 inch form factor for compatible Dell PowerEdge servers
- InterfaceSAS
- Capacity1.2TB
- RPM10000 RPM
- Form Factor2.5"
- 2 TB capacity expands server storage
- 10000 RPM spindle speed accelerates data access
- SAS 12Gb/s interface enables fast transfers
- 5 inch form factor fits dense PowerEdge bays
- Compatible with Dell PowerEdge R430 R630 R730 R730xd T430 T630 servers
Dell 400-AJPD 1.2TB SAS Drive
This new 1.2TB internal hard drive operates at 10000 RPM and uses a SAS interface running at 12Gb/s. It is built in a 2.5 inch form factor for Dell PowerEdge servers such as the R430, R630, R730, R730xd, T430 and T630. The drive increases system storage capacity while providing fast disk access for demanding workloads.
Server administrators needing 10K SAS storage
The drive suits administrators expanding storage in compatible 2.5 inch PowerEdge bays where 10000 RPM performance and a 12Gb/s SAS connection are required. It is not for systems that only accept 3.5 inch drives or that lack a SAS backplane. Buyers who need a larger capacity than 1.2TB must select a different model.
12Gb/s SAS interface decides fit
The single specification that determines compatibility is the 12Gb/s SAS interface; the server or controller must support this standard for the drive to function. The 2.5 inch form factor must also match the drive bay. Verify both points against the system documentation before purchase.
Points forts
- 2 TB capacity expands server storage
- 10000 RPM spindle speed accelerates data access
- SAS 12Gb/s interface enables fast transfers
- 5 inch form factor fits dense PowerEdge bays
- Compatible with Dell PowerEdge R430 R630 R730 R730xd T430 T630 servers
Caractéristiques
| Interface | SAS |
|---|---|
| Capacity | 1.2TB |
| RPM | 10000 RPM |
| Form Factor | 2.5" |
Questions sur cet article
Does the 2.5" form factor fit directly in the 2.5" bays of a PowerEdge R630?
Yes, the drive uses a standard 2.5" form factor and is listed as compatible with the PowerEdge R630 2.5" chassis.
Is any adapter or bracket required to install this SAS drive in a PowerEdge R730xd?
No, the drive mounts directly into the 2.5" hot-swap trays used by the R730xd; the tray itself provides the SAS connector.
What should be monitored on this 10000 RPM SAS drive to know when replacement is needed?
Watch SMART attributes for reallocated sectors, seek errors or rising temperature trends that indicate mechanical wear.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
