DELL
DELL 463-7475 1.2TB 10000RPM SAS 2.5" internal hard drive
1.2 TB 10000 RPM SAS 2.5" internal hard drive for high-speed enterprise storage
- InterfaceSAS
- Capacity1.2TB
- RPM10000 RPM
- Form Factor2.5"
- 2 TB capacity stores large datasets
- 10,000 RPM spindle speed accelerates data access
- SAS 12 Gb/s interface enables high-throughput transfers
- 5-inch form factor fits dense server bays
- New condition ensures full manufacturer reliability
Dell 1.2 TB SAS drive for enterprise workloads
The Dell 463-7475 is a 1.2 TB internal hard drive spinning at 10000 RPM. It uses a SAS interface running at 12 Gb/s. The 2.5 inch form factor fits standard drive bays in servers and storage arrays. It is built for environments that need consistent throughput and low latency.
Standard 2.5 inch SAS installation steps
Mount the drive in a compatible 2.5 inch bay or hot-swap tray using the correct screws. Connect the SAS data and power cables to the backplane or controller card. Ensure the controller supports 12 Gb/s SAS to get the rated link speed. A common issue is using a 6 Gb/s backplane which halves the interface bandwidth.
1.2 TB capacity with 10000 RPM performance
The 1.20 TB capacity suits databases, virtualisation hosts and transaction logs that benefit from fast random access. The 10000 RPM spindle speed keeps seek times low for mixed read and write workloads. Capacity runs out when storing large media archives or long-term backups. Sequential throughput is limited by the mechanical design compared with solid-state alternatives.
Points forts
- 2 TB capacity stores large datasets
- 10,000 RPM spindle speed accelerates data access
- SAS 12 Gb/s interface enables high-throughput transfers
- 5-inch form factor fits dense server bays
- New condition ensures full manufacturer reliability
Caractéristiques
| Interface | SAS |
|---|---|
| Capacity | 1.2TB |
| RPM | 10000 RPM |
| Form Factor | 2.5" |
Questions sur cet article
How can I verify the drive spins at 10000 RPM and negotiates a 12Gb/s SAS link after installation?
Check the drive information in your RAID controller BIOS or operating system utilities; they will report the spindle speed as 10000 RPM and the negotiated link rate as 12Gb/s SAS.
What comes in the box and what must I source separately for this 2.5" SAS drive?
The drive itself is included; a 2.5" drive bay, SAS backplane or cable, and a compatible SAS controller or RAID card are not supplied and must be purchased separately.
Which capacity and speed version of the 463-7475 should I choose for a 1.2TB 10000 RPM requirement?
The 463-7475 is a single SKU providing 1.2TB at 10000 RPM over a 12Gb/s SAS interface; no alternative capacities or speeds exist under this part number.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
