DELL
DELL JDTGX 1.6TB 12Gbps SAS 2.5 enterprise SSD
1.6 TB SAS enterprise SSD for Dell PowerEdge servers using write-intensive eMLC
- InterfaceSAS
- 6 TB capacity stores large enterprise datasets
- 12 Gbps SAS interface delivers high throughput for servers
- Write-intensive eMLC endurance handles heavy workloads
- 5 inch form factor fits standard drive bays
- Compatible with PowerEdge R740, R740xd, R730, R640 and more
Dell JDTGX 1.6TB SAS SSD
This enterprise solid-state drive delivers 1.6TB of storage using a 12Gbps SAS interface and write-intensive eMLC technology. It fits the standard 2.5-inch form factor for hot-swap server bays. The unit is new and has been tested with updated firmware applied. ||
Compatibility and use-case fit
The drive is validated for a wide range of Dell PowerEdge servers including R230, R240, R330, R340, R430, R440, R530, R540, R630, R640, R730, R730xd, R740, R740xd, R740XD2, R7425, R830, R840, R930, R940, R940XA, T330, T340, T430, T440, T630, T640, XR2, XR5610, XR7620 and storage arrays MD1400, MD1420. It suits write-heavy workloads such as databases and logging. Buyers needing a different capacity or interface should look elsewhere. ||
12Gbps SAS interface
The single specification that determines fit is the 12Gbps SAS interface. Your server or storage array must provide a compatible SAS backplane and controller running at this speed. Without a matching SAS connection the drive will not function.
Points forts
- 6 TB capacity stores large enterprise datasets
- 12 Gbps SAS interface delivers high throughput for servers
- Write-intensive eMLC endurance handles heavy workloads
- 5 inch form factor fits standard drive bays
- Compatible with PowerEdge R740, R740xd, R730, R640 and more
Caractéristiques
| Brand | Dell |
|---|---|
| Model | JDTGX, SDLT0CKM-016T |
| Interface | SAS |
Questions sur cet article
How much power does the 12 Gbps SAS eMLC drive draw under sustained write loads?
The 1.6 TB write-intensive SSD is built for enterprise duty cycles, so power draw stays within standard 2.5-inch SAS limits even during continuous operation.
Which controller or backplane is required to run this Dell 1.6 TB SAS SSD?
A 12 Gbps SAS HBA, RAID card or backplane with 2.5-inch drive bays is needed; the drive is validated for Dell PowerEdge servers and MD1400/MD1420 storage arrays.
Will this 12 Gbps SAS SSD work in an older PowerEdge R630 that currently runs 6 Gbps drives?
Yes, the drive is compatible with the R630 and will negotiate down to 6 Gbps on that backplane while retaining full 1.6 TB capacity and write-intensive endurance.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
Western Digital WD6NPURX Purple NV 6TB 5400 RPM 64MB SATA 3.5" internal hard drive
- Bare Drive
- SATA 6.0Gb/s
Seagate ST380215A 80GB 7200 RPM 2MB IDE 3.5" internal hard drive
- Bare Drive
- IDE Ultra ATA100 /…
HGST 0F23269 6TB 7200 RPM 128MB SATA 6.0Gb/s 3.5" internal hard drive
- Bare Drive
- SATA 6.0Gb/s



