DELL
DELL P252M 300GB 10000RPM 2.5" SAS internal hard drive
A 300 GB, 10,000 RPM SAS drive in a 2.5 inch form factor for server and storage arrays
- 300 GB capacity stores large workloads
- 10000 RPM spindle delivers fast data access
- 5 inch form factor fits compact bays
- SAS interface supports enterprise reliability
- New condition ensures full service life
300 GB 10 000 RPM SAS drive
The Dell P252M is a 2.5-inch internal hard drive with a 300 GB capacity and a 10 000 RPM spindle speed. It uses a SAS interface for direct attachment to compatible controllers. The drive is supplied new and is intended for desktop or server storage arrays that require this form factor.
Verify SAS controller and bay fit
Before ordering, confirm that the host system provides a SAS backplane or controller with an available port for this drive. The 2.5-inch form factor requires a matching drive bay or an adapter bracket in a 3.5-inch bay. Check that the chassis can supply power and cooling for a 10 000 RPM unit.
Fits hot-swap trays and RAID sets
The drive slides into standard 2.5-inch hot-swap trays used in many Dell and third-party enclosures. Its SAS interface allows it to join existing RAID volumes without extra cabling. The compact size leaves room for additional drives in dense chassis configurations.
Points forts
- 300 GB capacity stores large workloads
- 10000 RPM spindle delivers fast data access
- 5 inch form factor fits compact bays
- SAS interface supports enterprise reliability
- New condition ensures full service life
Caractéristiques
Aucune caractéristique publiée pour cet article pour l’instant.
Questions sur cet article
Does the P252M ship with a caddy, cables or mounting screws, or must they be purchased separately?
The drive is supplied as a bare 2.5" SAS unit; retail or OEM packing may vary, so a 2.5" drive caddy, SAS data cable and power adapter are not included and must be sourced separately
Which capacity or version of the P252M should I choose for a 2.5" SAS bay that needs 300 GB at 10 000 RPM?
This model is a single 300 GB 10 000 RPM 2.5" SAS drive; no other capacities or speeds are offered under the P252M part number
What sustained transfer rate can I expect from the 10 000 RPM SAS drive once installed in a server or workstation?
A 10 000 RPM SAS drive typically delivers sustained sequential reads in the low- to mid-100 MB/s range, with the 6 Gb/s SAS interface providing headroom for burst transfers
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
