DELL
DELL PowerEdge M1000e Blade Enclosure 10U 16 Half-Height 6 PSUs 9 Fans 2x 10G-PTM Midplane 1.1
A 10U blade enclosure holding 16 half-height or 8 full-height Dell M-series servers with 6 power supplies, 9 fans and dual 10 Gbps pass-through modules on a midplane 1.1
- Houses 16 half-height or 8 full-height blades in 10U
- Dual Chassis Management Controllers provide centralised access and control
- Integrated iKVM module enables remote keyboard, video and mouse management
- Six 3000-watt hot-swap power supplies deliver N+1 redundancy
- Nine hot-swap fans and 10 Gbps pass-through I/O ensure cooling and connectivity
10U Blade Enclosure for 16 Half-Height Servers
The Dell EMC PowerEdge M1000e is a 10U rackmount chassis that accepts up to 16 half-height or 8 full-height M-series blade servers. It ships with two Chassis Management Controllers, one iKVM module, six 3000-Watt power supplies, nine cooling fans and two 16-port 10Gbps pass-through I/O modules on a version 1.1 midplane. This configuration targets enterprises consolidating virtualisation, cloud or high-performance workloads into a single dense platform.
Replaces Standalone Rack Servers for Density Gains
The enclosure replaces multiple individual rack servers by housing up to 16 blades in 10U of rack space while sharing power, cooling and management infrastructure. The jump is worth it when your workloads benefit from centralised CMC control, hot-swappable N+1 redundant power supplies and a unified I/O fabric that reduces cable count and switch ports. Buyers who only need one or two servers will not utilise the shared architecture.
Verify Rack Depth Power Phase
Confirm your rack provides sufficient depth and airflow for a fully populated 10U chassis with six power supplies and nine fans. Check that your facility power circuits match the supply input requirements and that the phase configuration supports the intended redundancy mode. Ensure any M-series blades you plan to install are qualified for the version 1.1 midplane before ordering.
Points forts
- Houses 16 half-height or 8 full-height blades in 10U
- Dual Chassis Management Controllers provide centralised access and control
- Integrated iKVM module enables remote keyboard, video and mouse management
- Six 3000-watt hot-swap power supplies deliver N+1 redundancy
- Nine hot-swap fans and 10 Gbps pass-through I/O ensure cooling and connectivity
Caractéristiques
Aucune caractéristique publiée pour cet article pour l’instant.
Questions sur cet article
How many half-height blade servers can the 10U Dell PowerEdge M1000e enclosure hold?
The enclosure supports up to 16 half-height Dell M-series blade servers, or 8 full-height blades, giving you flexible density options for virtualization or high-performance workloads.
What is the correct order for installing the six 3000-Watt power supplies to achieve N+1 redundancy?
Insert all six hot-swappable PSUs into the rear bays; the chassis management controller automatically configures grid and N+1 redundancy, but skipping a bay breaks the redundancy scheme.
When should the nine enclosure fans and six power supplies be replaced to maintain cooling and power redundancy?
Fans and PSUs are hot-swappable; replace any unit immediately when the CMC reports a fault or the amber LED lights, ensuring N+1 cooling and power redundancy are never compromised.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



