DELL
DELL PowerEdge M640 Blade 2x Xeon Gold 5222 384GB DDR4 2x 300GB SAS
Dual Xeon Gold 5222 blade with 384GB DDR4 and 600GB SAS storage for dense compute clusters
- TypeBlade
- CPU TypeIntel Xeon
- CPU Speed3.80 GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size384GB
- Dual Xeon Gold 5222 CPUs at 3.80 GHz deliver high single-thread speed
- 384 GB DDR4 ECC memory supports large virtualisation workloads
- Two 300 GB 10K SAS drives provide fast local storage
- PERC H330 RAID controller manages redundancy for the installed drives
- iDRAC9 Enterprise remote management enables out-of-band server control
Dell PowerEdge M640 blade server
The Dell PowerEdge M640 is a half-height blade server supplied with two Intel Xeon Gold 5222 processors operating at 3.80 GHz. It arrives with 384 GB of DDR4 SDRAM installed across its memory slots and includes a PERC H330 SAS storage controller managing the internal drives. The system provides integrated graphics and iDRAC9 Enterprise remote management for out-of-band administration.
Suited for dense compute workloads needing high
This configuration suits environments that require a large memory footprint within a blade form factor, such as virtualization hosts or in-memory databases. The dual-socket design and 384 GB of installed DDR4 support heavy multi-threaded workloads. Buyers who need more than two 2.5-inch drive bays or who require GPU acceleration should look at other platforms.
384 GB DDR4 installed memory
The decisive specification is the 384 GB of DDR4 SDRAM already installed, which determines the immediate capacity for memory-intensive applications. The system supports a maximum of 1 TB, allowing future expansion if the workload grows. Verify that your blade enclosure provides the required power and cooling for this half-height module.
Points forts
- Dual Xeon Gold 5222 CPUs at 3.80 GHz deliver high single-thread speed
- 384 GB DDR4 ECC memory supports large virtualisation workloads
- Two 300 GB 10K SAS drives provide fast local storage
- PERC H330 RAID controller manages redundancy for the installed drives
- iDRAC9 Enterprise remote management enables out-of-band server control
Caractéristiques
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Blade |
| Type | Blade |
| CPU Type | Intel Xeon |
| CPU Speed | 3.80 GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 384GB |
| Memory Type | DDR4 SDRAM |
| Max Memory Capacity | 1TB |
| Hard Drive (Installed) | 600,00 |
| Storage Controller | Dell PERC H330 SAS Storage Controller |
| HDD Interface | SAS |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC9 Enterprise |
| Dimensions | 22 x 22x 10 in |
| Weight | 20 |
Questions sur cet article
How do I install the M640 blade into a PowerEdge chassis and what step is often missed?
Slide the blade into an empty bay until the latch clicks, then use iDRAC9 Enterprise to verify the blade is powered and recognised by the chassis management module — skipping this check is the common error.
Which components in this M640 will need replacement first during long-term operation?
The two 300 GB 10K SAS 2.5" hard drives are the primary wear items; plan to replace them before the DDR4 ECC memory or the Xeon Gold 5222 processors.
What thermal or power limit appears first when the M640 runs sustained workloads?
The chassis cooling capacity for a 22 x 22 x 10 in blade with dual 3.80 GHz Xeons becomes the limiting factor before the PERC H330 controller or the 384 GB DDR4 memory saturate.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
