DELL
DELL PowerEdge M640 Blade 2x Xeon Platinum 8158 128GB DDR4 2x 300GB SAS
Dual Xeon Platinum 8158 blade server with 128GB DDR4 and two 300GB SAS drives
- TypeBlade
- CPU TypeIntel Xeon
- CPU Speed3 GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size128GB
- Dual Xeon Platinum 8158 CPUs deliver 24 cores at 3.0 GHz
- 128GB DDR4 ECC memory supports large virtualisation workloads
- Dual 300GB 10K SAS drives provide fast redundant storage
- PERC H330 RAID controller manages array reliability
- iDRAC9 Enterprise enables remote server management
Ready-to-deploy blade server
The Dell PowerEdge M640 blade arrives with dual Xeon Platinum 8158 processors at 3.0 GHz, 128 GB of DDR4 memory and two 300 GB 10K SAS drives on a PERC H330 controller. Firmware is current and the system has passed full diagnostics.
Suits dense compute clusters; not for GPU workloads
This configuration targets virtualisation hosts, database nodes and HPC clusters that need high core counts in a half-height form factor. The integrated graphics and lack of PCIe accelerator slots rule out GPU-accelerated AI, rendering or VDI deployments.
Dual 12-core CPUs set the performance ceiling
With 24 total cores and 128 GB of DDR4 installed against a 1 TB maximum, the processor complex is the primary scaling limit. Memory can be expanded later, but the socket count is fixed at two.
Points forts
- Dual Xeon Platinum 8158 CPUs deliver 24 cores at 3.0 GHz
- 128GB DDR4 ECC memory supports large virtualisation workloads
- Dual 300GB 10K SAS drives provide fast redundant storage
- PERC H330 RAID controller manages array reliability
- iDRAC9 Enterprise enables remote server management
Caractéristiques
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Blade |
| Type | Blade |
| CPU Type | Intel Xeon |
| CPU Speed | 3 GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 128GB |
| Memory Type | DDR4 SDRAM |
| Max Memory Capacity | 1TB |
| Hard Drive (Installed) | 600,00 |
| Storage Controller | Dell PERC H330 SAS Storage Controller |
| HDD Interface | SAS |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC9 Enterprise |
| Dimensions | 22 x 22x 10 in |
| Weight | 20 |
Questions sur cet article
Does the PERC H330 RAID controller limit the SAS drives to a specific speed?
The controller supports 12 Gb/s SAS signalling, so the two installed 300 GB 10K drives run at their native interface rate.
What physical space does the blade require inside the chassis?
The unit measures 22 x 22 x 10 in and weighs 20 lb, fitting a half-height slot in a compatible Dell enclosure.
How is the blade installed and what step is often missed?
Slide the blade into the enclosure until it locks, then use iDRAC9 Enterprise to complete network and firmware setup before powering on the operating system.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
