DELL
DELL PowerEdge R440 1U rack server 2x Xeon Gold 5118 2.3GHz 12-core 128GB DDR4 8x 960GB SSD H330
1U rack server with dual 12-core Xeon Gold 5118 CPUs at 2.3 GHz, 128 GB DDR4 ECC memory, eight 960 GB SATA SSDs on a H330 controller, dual 1 GbE ports, iDRAC9 Express.
- Dual Xeon Gold 5118 CPUs deliver 24 cores at 2.3GHz base
- 128GB DDR4-2400 ECC memory supports reliable virtualization workloads
- Eight 960GB SATA SSDs provide high-capacity flash storage
- PERC H330 controller manages SAS and SATA drives at 12Gb/s
- Dual 550W platinum power supplies with iDRAC9 Express remote management
Compact 1U rack server for dense deployments
The Dell PowerEdge R440 is a 1U rackmount server built for data centres and virtualisation workloads. It fits standard racks and targets organisations that need high compute density in a small footprint. The platform supports Intel Xeon Scalable processors for enterprise application hosting and cloud infrastructure tasks.
Dual 550 W platinum PSUs with eight hot-swap bays
Two 550 watt platinum efficiency power supplies provide redundancy for continuous operation. The front chassis holds eight 2.5 inch drive bays populated with 960 GB SATA solid state drives managed by a PERC H330 12 Gb/s SAS/SATA controller. Dual integrated gigabit ethernet ports and iDRAC 9 Express give remote management and network connectivity without extra cards.
Upgrades from single-socket or lower-core systems
Moving from a single-processor box or a server with fewer than 12 cores per socket adds the parallel throughput needed for virtualisation clusters and database workloads. The jump is worth it when current hardware cannot keep multiple VMs responsive or when storage latency limits application performance. This configuration delivers 24 total cores and 128 GB of DDR4-2400 ECC memory for those demands.
Points forts
- Dual Xeon Gold 5118 CPUs deliver 24 cores at 2.3GHz base
- 128GB DDR4-2400 ECC memory supports reliable virtualization workloads
- Eight 960GB SATA SSDs provide high-capacity flash storage
- PERC H330 controller manages SAS and SATA drives at 12Gb/s
- Dual 550W platinum power supplies with iDRAC9 Express remote management
Caractéristiques
Aucune caractéristique publiée pour cet article pour l’instant.
Questions sur cet article
What maximum throughput does the PERC H330 controller support for the installed SAS and SATA drives?
The PERC H330 controller provides a 12Gb/s SAS and SATA interface, so the eight 960GB SSDs connect at up to that link speed.
How much rack depth is required for the 1U chassis and its ready rails?
The server is a 1U rackmount unit; the supplier notes that front bezel and ready rails are not included, so you must supply rails that match your cabinet depth.
How are the two Xeon Gold 5118 processors and 128GB of DDR4-2400 ECC memory installed, and what step is commonly missed?
Both CPUs come pre-installed on the system board; the 128GB (8x 16GB) DDR4-2400 ECC registered DIMMs are factory populated, so the only step is seating the server in the rack and connecting power.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



