DELL
DELL PowerEdge R630 10SFF 2x Xeon E5-2667v3 384GB DDR4 No Drive
A 1U rack server with ten 2.5-inch drive bays, dual Xeon E5-2667v3 processors at 3.2GHz and 384GB DDR4 memory, sold without drives
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed3.2GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size384GB
- Dual Xeon E5-2667v3 processors at 3.2GHz deliver high compute density
- 384GB DDR4 ECC memory supports large virtualisation workloads
- 10 x 2.5" drive bays with PERC H730 SAS controller enable flexible storage
- iDRAC8 Enterprise licence provides full remote management
- 2 x 495W redundant power supplies ensure continuous operation
Rack Server for Dense Compute
The Dell PowerEdge R630 fits two Xeon E5-2667v3 processors running at 3.2GHz into a 1U chassis with ten 2.5-inch drive bays. It targets workloads that need high core density and large memory capacity in minimal rack space.
Upgrade Path from Smaller R630 Builds
Moving from a single-processor or lower-memory R630 configuration adds a second eight-core CPU and scales installed RAM to 384GB. The jump is worthwhile when virtualisation host density or in-memory database size exceeds what one socket can deliver.
Memory and Storage Headroom
Eight-core processors and 384GB of DDR4 ECC registered memory support heavy virtualisation and large dataset caching. The PERC H730 SAS controller manages up to ten SATA drives, while the 1.5TB maximum memory ceiling leaves room for future expansion.
Points forts
- Dual Xeon E5-2667v3 processors at 3.2GHz deliver high compute density
- 384GB DDR4 ECC memory supports large virtualisation workloads
- 10 x 2.5" drive bays with PERC H730 SAS controller enable flexible storage
- iDRAC8 Enterprise licence provides full remote management
- 2 x 495W redundant power supplies ensure continuous operation
Caractéristiques
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 3.2GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 384GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 1.5TB |
| Hard Drive (Installed) | 9,60 |
| Storage Controller | Dell PERC H730 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC8 - Enterprise License |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
What rack depth clearance does the 36 x 24 x 10 inch chassis need?
The server measures 36 inches deep, 24 inches wide and 10 inches high, so allow at least that depth plus cable bend radius behind the rear panel.
Which step is often missed when seating the PERC H730 SAS controller during installation?
The H730 must be fully pressed into its dedicated PCIe slot until the retention latch clicks; a partial seat causes the drives to disappear from the BIOS.
When should the two 495W power supplies be replaced to keep redundancy?
Replace a unit as soon as iDRAC8 reports a power-supply fault or the amber LED lights, otherwise the chassis loses N+1 redundancy.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



