DELL
DELL PowerEdge R630 10x2.5" 2x Xeon E5-2660v4 384GB DDR4
Rack server with 10 drive bays, dual 14-core Xeon processors and 384 GB DDR4 memory
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed4 2 GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size384GB
- 10-bay 2.5" chassis supports dense storage configurations
- Dual Xeon E5-2660v4 processors with 14 cores each deliver high throughput
- 384GB DDR4 ECC registered memory enables large dataset handling
- PERC H730 SAS controller provides hardware RAID acceleration
- iDRAC8 Enterprise license allows remote server management
Dual-socket Xeon server for virtualisation
The Dell PowerEdge R630 fits 10 drive bays in a 1U rack chassis and ships with two Xeon E5-2660v4 processors, each offering 14 cores and 35 MB cache. Installed memory totals 384 GB of DDR4 ECC registered DIMMs, leaving headroom up to the 1.5 TB maximum. A PERC H730 SAS controller manages RAID across SATA drives, while dual 495 W supplies provide redundancy for continuous operation.
Thermals noise and power draw in typical rack
Dual 495 W power supplies share the load, keeping each unit well within its efficiency curve during normal multi-tenant workloads. The 1U form factor relies on high-speed system fans that ramp according to inlet temperature, so acoustic output is noticeable but consistent in a dedicated server room. Redundant supplies allow hot-swap replacement without interrupting compute or storage traffic.
Sustained load behaviour under heavy compute
Under prolonged CPU-intensive tasks the twin 14-core processors maintain their 2 GHz base frequency while the memory subsystem delivers full DDR4 bandwidth across all channels. The PERC H730 controller sustains sequential and random I/O to the 10-bay array without thermal throttling, and iDRAC8 Enterprise provides continuous remote health monitoring. The platform scales to the 1.5 TB memory ceiling for workloads that outgrow the factory 384 GB configuration.
Points forts
- 10-bay 2.5" chassis supports dense storage configurations
- Dual Xeon E5-2660v4 processors with 14 cores each deliver high throughput
- 384GB DDR4 ECC registered memory enables large dataset handling
- PERC H730 SAS controller provides hardware RAID acceleration
- iDRAC8 Enterprise license allows remote server management
Caractéristiques
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 4 2 GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 384GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 1.5TB |
| Hard Drive (Installed) | 5,00 |
| Storage Controller | Dell PERC H730 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC8 - Enterprise License |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
How do I install the 10 2.5" drives into the front bays, and what step do people miss?
Slide each drive into a bay until the lever clicks, then verify the PERC H730 RAID Controller sees every disk in the BIOS before loading the OS.
Which components will need replacement first during long-term operation?
The two 495W power supplies and the system fans are the primary field-replaceable units; the iDRAC8 Enterprise license remains valid for the server life.
What thermal or power limit appears first when both Xeon E5-2660v4 CPUs run at 2 GHz continuously?
The dual 495W power supplies set the sustained power ceiling; the iDRAC8 sensors will throttle the 14-core processors if inlet temperature exceeds specification.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



