DELL
DELL PowerEdge R630 8SFF 2x Xeon E5-2650L v3 1.8GHz 12-Core 768GB DDR4 No Drive Server
Dual 12-core Xeon server with 768GB DDR4, eight 2.5-inch bays and PERC H730 RAID controller
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed1.8GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size768GB
- Dual Xeon processors deliver 24 cores for parallel workloads
- 768GB DDR4 ECC memory supports large virtualisation environments
- PERC H730 SAS controller enables hardware RAID arrays
- Eight 2.5-inch bays provide flexible storage expansion
- iDRAC8 Enterprise licence allows remote server management
Dual Xeon E5-2650L v3 server
The Dell PowerEdge R630 is a 1U rack-mounted server system equipped with two Intel Xeon E5-2650L v3 processors running at 1.8 GHz. Each CPU provides 12 cores and 30 MB of cache, delivering 24 threads for multi-threaded workloads. The system includes 768 GB of DDR4 ECC registered memory across the available DIMM slots. A PERC H730 SAS RAID controller manages storage connectivity for the eight 2.5-inch drive bays.
Virtualisation hosts needing dense memory
This configuration suits organisations consolidating virtual machines or running memory-intensive databases where the 768 GB capacity reduces the need for additional nodes. The dual low-power Xeons and redundant 495 W power supplies support continuous operation in space-constrained racks. Buyers who require local boot drives or large-capacity SSD arrays must source drives separately because no storage devices are installed.
768 GB DDR4 installed memory
The single specification that determines fit is the 768 GB of DDR4 ECC registered memory already populated in the chassis. This amount is half the 1.5 TB maximum the platform supports, so expansion is possible if the application demands more capacity. Verify that your workload fits within this memory footprint or plan for additional DIMMs before deployment.
Points forts
- Dual Xeon processors deliver 24 cores for parallel workloads
- 768GB DDR4 ECC memory supports large virtualisation environments
- PERC H730 SAS controller enables hardware RAID arrays
- Eight 2.5-inch bays provide flexible storage expansion
- iDRAC8 Enterprise licence allows remote server management
Caractéristiques
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 1.8GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 768GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 1.5TB |
| Hard Drive (Installed) | 2,00 |
| Storage Controller | Dell PERC H730 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC8 - Enterprise License |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
How can I confirm the PERC H730 RAID controller is recognised after first boot?
Enter the iDRAC8 web interface or press Ctrl+R during POST to open the PERC H730 BIOS utility; both will show the controller firmware version and connected drive status.
Which components are included and which must be purchased separately?
The chassis ships with two Xeon E5-2650L v3 CPUs, 768GB DDR4 ECC registered memory, dual 495W power supplies, an Intel I350/X540 quad-port network card and the PERC H730 RAID controller; 2.5" drives and rail kit are not included.
Which memory capacity should I select if I need room for future expansion?
The system holds 768GB today and supports up to 1.5TB total, so choosing the current 768GB configuration leaves half the maximum capacity available for later DDR4 module upgrades.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
