DELL
DELL PowerEdge R640 4LFF Xeon Gold 6226R 32GB DDR4 No Drive
Rack server with four 3.5-inch bays, one 16-core 2.9 GHz Xeon Gold 6226R, 32 GB DDR4 and PERC H740P RAID controller
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.9 GHz
- # of Processors Installed1
- MAX Processors2
- Installed Memory Size32GB
- 16-core Xeon Gold 6226R at 2.9 GHz delivers strong compute density
- 32 GB DDR4 ECC registered memory supports virtualisation workloads
- PERC H740P RAID controller enables flexible storage arrays
- Four 3.5-inch drive bays ready for SATA capacity expansion
- iDRAC9 Enterprise licence provides full remote server management
Dell PowerEdge R640 4LFF Server
The Dell PowerEdge R640 is a 1U rack-mount server system equipped with one Intel Xeon Gold 6226R processor running at 2.9 GHz with 16 cores and 22 MB cache. It includes 32 GB of DDR4 ECC registered memory in a two-module configuration and a PERC H740P RAID controller supporting SATA drives across four 3.5-inch bays.
Suited for single-socket workloads needing
This configuration fits environments that run virtualisation, database or file workloads on a single processor with room to add a second CPU later. The four large-form-factor bays allow high-capacity SATA drives, while dual 750 W supplies and iDRAC9 Enterprise remote management simplify operations. Buyers who require dual-processor performance from day one or who need storage interfaces beyond SATA should evaluate other platforms.
Four 3.5-inch SATA drive bays with PERC H740P RAID
The chassis provides four hot-plug 3.5-inch bays connected to the PERC H740P controller for hardware RAID across SATA hard drives or SSDs. No drives are installed, so the buyer selects capacity and redundancy to match the workload. Maximum supported memory reaches 7.68 TB when fully populated.
Points forts
- 16-core Xeon Gold 6226R at 2.9 GHz delivers strong compute density
- 32 GB DDR4 ECC registered memory supports virtualisation workloads
- PERC H740P RAID controller enables flexible storage arrays
- Four 3.5-inch drive bays ready for SATA capacity expansion
- iDRAC9 Enterprise licence provides full remote server management
Caractéristiques
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.9 GHz |
| # of Processors Installed | 1 |
| MAX Processors | 2 |
| Installed Memory Size | 32GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 7.68TB |
| Hard Drive (Installed) | 4,00 |
| Storage Controller | Dell PERC H740P Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC9 - Enterprise License |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
Does the server ship with any 3.5 inch SATA drives installed?
The unit comes with zero drives installed so the buyer must supply their own 3.5 inch SATA drives for the four available bays
Can the PERC H740P RAID controller manage both new drives and older SATA disks I already own?
Yes the PERC H740P supports SATA and will recognise legacy SATA disks alongside newly purchased ones in the same array
How do I confirm iDRAC9 Enterprise remote management is active after first boot?
During POST the iDRAC9 firmware version appears on screen and the dedicated network port shows link activity once an Ethernet cable is connected
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
