DELL
DELL PowerEdge R730xd 24SFF 2x Xeon E5-2623 v3 256GB DDR4
24-bay 2.5-inch rack server with dual Xeon E5-2623 v3 processors, 256 GB DDR4 ECC memory, PERC H730 SAS RAID controller, 10 GbE and 1 GbE networking.
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed3GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size256GB
- 24 hot-swap 2.5" drive bays for dense storage
- Dual Xeon E5-2623 v3 CPUs deliver 8 total cores
- 256GB DDR4 ECC registered memory installed
- PERC H730 SAS RAID controller manages arrays
- Dual 1100W power supplies provide redundancy
Dense 2.5-inch storage chassis
The Dell PowerEdge R730xd packs twenty-four 2.5-inch drive bays into a 2U rack frame, giving storage-heavy workloads a high-density platform. Dual Xeon E5-2623 v3 processors and 256 GB of DDR4 ECC memory supply the compute base for virtualisation clusters, software-defined storage nodes or backup repositories that prioritise capacity over raw core count. Buyers needing more than two sockets or faster single-thread performance should look elsewhere.
Dual 1100 W supplies feed active cooling
Two redundant 1100 W power supplies feed the system, so normal operation draws from both units while keeping headroom for drive spin-up and CPU boost. The integrated iDRAC8 Enterprise controller lets administrators monitor inlet temperature, fan speed and power consumption remotely without attaching a keyboard or monitor. Acoustic output in a typical rack aisle stays within standard data-centre limits, though the chassis is not designed for quiet office deployment.
PERC H730 RAID controller and quad-port networking
A PERC H730 SAS RAID controller with 2 GB cache handles the twenty-four-bay backplane, enabling hardware RAID 0, 1, 5, 6, 10, 50 and 60 without consuming a PCIe slot. An Intel I350 and X540 combination delivers two 10 GbE and two 1 GbE ports for segregated management, storage and application traffic. Rail kits are available on request, and the unit ships with BIOS and firmware pre-updated to the latest stable release.
Points forts
- 24 hot-swap 2.5" drive bays for dense storage
- Dual Xeon E5-2623 v3 CPUs deliver 8 total cores
- 256GB DDR4 ECC registered memory installed
- PERC H730 SAS RAID controller manages arrays
- Dual 1100W power supplies provide redundancy
Caractéristiques
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 3GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 256GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 768GB |
| Hard Drive (Installed) | 21.600,00 |
| Storage Controller | Dell PERC H730 SAS Controller |
| HDD Interface | SAS |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC8 - Enterprise License |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
How do I install the 2.5" drives in the 24-bay front chassis and which step is often missed?
Slide each drive into a bay until the carrier latch clicks, then verify the PERC H730 RAID controller detects every disk in the BIOS before loading the OS.
What maintenance or replacement will the DDR4 ECC registered memory need later?
The 256GB installed DDR4 ECC registered modules can be expanded to 768GB; replace any stick that logs correctable errors in iDRAC8.
What thermal or power limit appears first during sustained load on the dual Xeon E5-2623 v3 CPUs?
The 2x 1100W power supplies set the ceiling; prolonged 100% CPU utilisation can trip their over-current protection before the chassis fans reach maximum speed.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



