DELL
DELL PowerEdge R740 2x Silver 4210R 10C 64GB 4x 800GB SAS SSD H730P
A 2U rack server with dual 10-core Intel Silver 4210R CPUs at 2.4GHz, 64GB DDR4, four 800GB SAS SSDs and an H730P RAID controller
- TypeRack
- Rack Height2U
- CPU TypeIntel
- Installed Memory Size64GB
- Hard Drive (Installed)4x 800GB SAS SSD
- Storage ControllerH730P
- Dual 10-core Intel Silver 4210R at 2.4GHz for multi-threaded throughput
- 64GB DDR4 in four 16GB modules at 2666 MT/s for responsive workloads
- Four 800GB SAS SSDs on H730P RAID controller for fast redundant storage
- iDRAC9 Enterprise remote management with dedicated network access for lights-out control
- Eight 2.5-inch drive bays plus up to eight PCIe Gen 3 slots for flexible expansion
Dual 10-core Silver 4210R server
The Dell EMC PowerEdge R740 is a 2U rack server equipped with two Intel Silver 4210R processors, each running at 2.4 GHz with ten cores and 13.75M cache. It ships with 64GB of DDR4 memory across four 16GB modules and four 800GB SAS SSDs managed by an H730P RAID controller. The platform targets virtualisation hosts, database nodes and general-purpose compute clusters that need redundant power and remote management.
PCIe Gen 3 and 10 GbE ceiling
The chassis provides up to eight PCIe Gen 3 slots for additional controllers, NICs or accelerators, but the bus generation limits throughput to the Gen 3 maximum. Network I/O is handled by an Intel X550 dual-port 10 GbE RJ45 adapter plus two 1 GbE ports, so aggregate bandwidth tops out at the 10 GbE line rate. Storage expansion is confined to the eight 2.5-inch drive bays and the SAS interface of the H730P controller.
Tool-less rails and iDRAC9 access
The server includes sliding rails and a front bezel for tool-less rack mounting, while the 1100W redundant power supplies slide in from the rear. Initial configuration is performed through the iDRAC9 Enterprise interface, which gives full out-of-band control over firmware updates, hardware health and virtual console. Common issues arise when firmware versions across the RAID controller, NIC and iDRAC drift out of alignment, so a coordinated update cycle is recommended before production deployment.
Points forts
- Dual 10-core Intel Silver 4210R at 2.4GHz for multi-threaded throughput
- 64GB DDR4 in four 16GB modules at 2666 MT/s for responsive workloads
- Four 800GB SAS SSDs on H730P RAID controller for fast redundant storage
- iDRAC9 Enterprise remote management with dedicated network access for lights-out control
- Eight 2.5-inch drive bays plus up to eight PCIe Gen 3 slots for flexible expansion
Caractéristiques
| Brand | DELL |
|---|---|
| Model | R740 |
| Type | Rack |
| Rack Height | 2U |
| CPU Type | Intel |
| Installed Memory Size | 64GB |
| Hard Drive (Installed) | 4x 800GB SAS SSD |
| Storage Controller | H730P |
| Max HDD Capacity | 8x 2.5" Drive Bays |
| Remote Management | iDRAC9 Enterprise |
Questions sur cet article
Which drive configuration should I choose for the R740?
The server ships with four 800GB SAS SSDs in a 2U chassis that supports up to eight 2.5-inch bays, leaving four open slots for expansion.
What does the 64GB DDR4 memory provide in this server?
64GB DDR4 is installed as four 16GB PC4-2666 modules, giving 2666 MT/s speed across two Silver 4210R processors.
What does the H730P RAID controller support?
The H730P manages the four 800GB SAS SSDs and can handle additional drives in the remaining four 2.5-inch bays.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
