DELL
DELL PowerEdge R740 2x Silver 4210R 128GB 2x 300GB SAS H730P
2U rack server with dual 10‑core 2.4 GHz CPUs, 128 GB DDR4, dual 300 GB 10K SAS drives and H730P RAID controller
- TypeRack
- Rack Height2U
- CPU TypeIntel
- Installed Memory Size128GB
- Hard Drive (Installed)2x 300GB 10K SAS
- Storage ControllerH730P
- Dual 10-core Silver 4210R CPUs at 2.4 GHz handle heavy workloads
- 128 GB DDR4 memory across 8 modules supports virtualisation density
- H730P RAID controller protects data on 2x 300 GB 10K SAS drives
- iDRAC9 Enterprise enables remote management from anywhere
- Up to 8 PCIe Gen 3 slots plus Intel X550 10 Gb networking expand I/O capacity
2U Rack Server for Virtualisation
The Dell EMC PowerEdge R740 is a 2U rack server built around two Intel Silver 4210R processors, each with ten cores at 2.4 GHz and 13.75 MB cache. It ships with 128 GB of DDR4 memory in eight 16 GB modules running at 2666 MT/s. The H730P RAID controller manages two 300 GB 10K SAS drives, and the chassis provides eight 2.5-inch drive bays for further expansion.
Suited for Dense Compute, Not GPU Workloads
This configuration suits organisations that need high core counts and large memory capacity in a compact rack footprint, such as virtualisation clusters or database nodes. The dual 10 GbE and dual 1 GbE ports from the Intel X550 controller give strong network throughput. Buyers who need GPU acceleration or more than eight PCIe Gen 3 slots should look elsewhere, as the chassis does not support those requirements.
Bundled Rails, Bezel and Redundant Power
The package includes rack rails, a front bezel without LCD and power cords, so the server can be installed immediately in a standard cabinet. Dual 1100 W redundant power supplies provide failover protection without extra procurement. iDRAC9 Enterprise is licensed, enabling full remote management and firmware updates over the network from day one.
Points forts
- Dual 10-core Silver 4210R CPUs at 2.4 GHz handle heavy workloads
- 128 GB DDR4 memory across 8 modules supports virtualisation density
- H730P RAID controller protects data on 2x 300 GB 10K SAS drives
- iDRAC9 Enterprise enables remote management from anywhere
- Up to 8 PCIe Gen 3 slots plus Intel X550 10 Gb networking expand I/O capacity
Caractéristiques
| Brand | DELL |
|---|---|
| Model | R740 |
| Type | Rack |
| Rack Height | 2U |
| CPU Type | Intel |
| Installed Memory Size | 128GB |
| Hard Drive (Installed) | 2x 300GB 10K SAS |
| Storage Controller | H730P |
| Max HDD Capacity | 8x 2.5" Drive Bays |
| Remote Management | iDRAC9 Enterprise |
Questions sur cet article
What rack space and power circuits must be available before installing this 2U server?
The R740 occupies 2U of rack height and ships with dual 1100W redundant power supplies, so two PDU outlets on separate circuits are required for full redundancy.
Will the H730P RAID controller recognise the existing 300GB 10K SAS drives from an older PowerEdge?
Yes, the H730P supports 12Gb SAS and will detect the 300GB 10K SAS drives; they can be imported into a new virtual disk or used as-is after a consistency check.
How can I confirm the iDRAC9 Enterprise remote management is active after first boot?
Connect the dedicated iDRAC network port, browse to the IP shown on the front LCD, and verify the iDRAC9 Enterprise licence status reads "Licensed" in the overview page.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



