DELL
DELL PowerEdge R740 8LFF 2x Xeon Gold 6226R 16GB DDR4 No Drive Rack Server
Rack server with eight 3.5-inch drive bays, dual Xeon Gold 6226R CPUs at 2.9 GHz, 16 GB DDR4, PERC H730P RAID controller and iDRAC9 remote management
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.9 GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size16GB
- Dual Xeon Gold 6226R CPUs provide 16 cores each at 2.9 GHz for compute-intensive tasks
- Eight 3.5-inch drive bays support high-capacity SATA storage expansion
- PERC H730P RAID controller delivers hardware RAID with 4800 MB cache for data protection
- iDRAC9 Enterprise licence enables full remote management and monitoring
- 16 GB DDR4 ECC registered memory installed with capacity up to 3 TB
Ready-to-configure 2U rack server
The Dell PowerEdge R740 is a 2U rackmount server system supplied new with two Xeon Gold 6226R processors running at 2.9 GHz and 16 GB of DDR4 ECC registered memory. Eight 3.5-inch drive bays are available for SATA hard drives, though none are installed in this configuration. A PERC H730P RAID controller and an integrated 10 GbE two-port 562T adapter are fitted, alongside dual 750 W power supplies and iDRAC9 Enterprise remote management.
Suits virtualisation hosts needing dense 3.5-inch
This chassis fits workloads that benefit from up to eight large-form-factor SATA drives and dual-socket Xeon compute. Buyers who require smaller 2.5-inch bays, a different drive interface, or a single-processor layout should consider other platforms. The 16 GB base memory supports light consolidation; heavier memory footprints will need additional DDR4 modules to approach the 3 TB maximum.
3 TB DDR4 ceiling
The platform supports a maximum of 3 TB of DDR4 memory across its DIMM slots. Confirm that your intended workload stays within this limit before ordering, as the installed 16 GB represents only a starting point.
Points forts
- Dual Xeon Gold 6226R CPUs provide 16 cores each at 2.9 GHz for compute-intensive tasks
- Eight 3.5-inch drive bays support high-capacity SATA storage expansion
- PERC H730P RAID controller delivers hardware RAID with 4800 MB cache for data protection
- iDRAC9 Enterprise licence enables full remote management and monitoring
- 16 GB DDR4 ECC registered memory installed with capacity up to 3 TB
Caractéristiques
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.9 GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 16GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 48,00 |
| Storage Controller | Dell PERC H730P Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC9 - Enterprise License |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
How do I install the 3.5-inch drives in the 8-bay chassis and which step is commonly missed?
Slide each drive into a bay until the carrier latch clicks, then verify the PERC H730P RAID controller detects every disk in the BIOS before loading the OS.
What maintenance will the 750-watt power supplies and iDRAC9 remote management need over time?
Clean the PSU air intakes quarterly, confirm both units share load evenly, and apply iDRAC firmware updates when Dell releases them.
Which limit appears first when the dual 6226R processors run sustained workloads at 2.9 GHz?
Thermal throttling triggers once the chassis inlet temperature exceeds the rated maximum, reducing clock speed to protect the CPUs.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



