DELL
Dell PowerEdge R740 8LFF 2x Xeon Gold 6246R 256GB DDR4 No Drive
A rack server with eight 3.5-inch bays, two 3.4 GHz 16-core Xeon Gold 6246R processors and 256 GB DDR4 memory, ready for storage configuration
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed3.4 GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size256GB
- Dual Xeon Gold 6246R at 3.4 GHz provide 16 cores each for parallel workloads
- 256GB DDR4 ECC memory supports large datasets and virtualisation
- Eight 3.5" drive bays with PERC H730P RAID controller enable flexible storage
- iDRAC9 Enterprise licence gives remote management and monitoring
- 10GbE 562T dual-port adapter delivers high-throughput networking
8-Bay 3.5" Rack Server for Dense Storage
The Dell PowerEdge R740 chassis supports up to eight 3.5-inch SATA drives and ships with a PERC H730P RAID controller. Two Xeon Gold 6246R processors run at 3.4 GHz with sixteen cores each and 35.75 MB cache. Installed memory is 256 GB DDR4 ECC registered, expandable to 3 TB. Remote management uses iDRAC9 Enterprise and dual 750 W supplies power the 2U unit.
Suits High-Capacity Archive and Virtualisation Hosts
Buyers needing many large drives, dual-socket compute and hardware RAID will match this platform. It is not for deployments that require 2.5-inch bay density, 10 GB networking beyond the fitted 562T adapter, or GPU compute because only integrated graphics are present. The rack-mount form factor also excludes tower-only environments.
PERC H730P RAID Controller Decides Storage Topology
The fitted PERC H730P controller manages the eight SATA bays and determines which RAID levels and drive counts are possible. Verify that your desired array configuration is supported by this specific controller before purchase.
Points forts
- Dual Xeon Gold 6246R at 3.4 GHz provide 16 cores each for parallel workloads
- 256GB DDR4 ECC memory supports large datasets and virtualisation
- Eight 3.5" drive bays with PERC H730P RAID controller enable flexible storage
- iDRAC9 Enterprise licence gives remote management and monitoring
- 10GbE 562T dual-port adapter delivers high-throughput networking
Caractéristiques
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 3.4 GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 256GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 16,00 |
| Storage Controller | Dell PERC H730P Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC9 - Enterprise License |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
How do I install the Dell PERC H730P RAID controller in the PowerEdge R740 8LFF chassis?
The PERC H730P controller is pre-installed in the server. Connect the 8x 3.5" drive bays using the supplied SATA cables to the controller ports, then configure RAID volumes via the controller BIOS during boot.
What memory maintenance or replacement will the 256GB DDR4 ECC Registered configuration need later?
The system uses DDR4 ECC Registered modules supporting up to 3TB total capacity. Failed modules can be replaced individually; add matching DDR4 ECC Registered DIMMs to expand memory without removing existing sticks.
What thermal or power limit appears first when both Xeon Gold 6246R processors run sustained 3.4 GHz workloads?
Dual 750W power supplies deliver redundant power for the 2x 16-core CPUs. Under sustained full-load the 750W units set the first power envelope; iDRAC9 Enterprise monitors thermal headroom and throttles if limits are reached.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



