DELL
DELL PowerEdge R740xd 12LFF 2x Xeon Gold 5218R 512GB DDR4
A 12-bay 3.5-inch rack server with dual Xeon Gold 5218R processors at 2.1 GHz, 512 GB DDR4 ECC memory, PERC H730P RAID controller, 10 GbE networking.
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.1 GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size512GB
- Dual Xeon Gold 5218R CPUs deliver 20 cores each at 2.1 GHz
- 512 GB DDR4 ECC memory supports demanding virtualization workloads
- 12 LFF drive bays accept 3.5 inch SATA storage up to 24 TB total
- PERC H730P RAID controller manages arrays with 2 GB cache
- iDRAC9 Enterprise enables remote management and firmware updates
PowerEdge R740xd 12-bay server
The Dell PowerEdge R740xd is a 2U rack server populated with two Intel Xeon Gold 5218R processors running at 2.1 GHz. It ships with 512 GB of DDR4 ECC registered memory and a PERC H730P RAID controller. The chassis provides twelve 3.5-inch drive bays for SATA hard drives. Integrated graphics and a 10 GbE two-port 562T adapter handle display and network connectivity. Dual 1100 W power supplies and iDRAC9 Enterprise remote management complete the platform.
Suits dense storage clusters.
This configuration targets buyers who need high capacity in a 2U form factor, such as backup targets, media archives or software-defined storage nodes. The twelve large-form-factor bays and hardware RAID controller support large SATA drive sets. Buyers who want more storage bays than twelve, or who require native U.2/U.3 slots for direct-attached flash, should look at a different chassis. Workloads that exceed the two-socket limit or the 3 TB memory ceiling also fall outside this system.
Twelve 3.5-inch drive bays define capacity
The single specification that decides fit is the twelve-bay 3.5-inch chassis. It sets the maximum raw storage to the number of drives multiplied by the largest supported SATA drive size. If the deployment needs fewer bays, a smaller server reduces cost and power. If it needs more bays or native flash slots, a different platform is required.
Points forts
- Dual Xeon Gold 5218R CPUs deliver 20 cores each at 2.1 GHz
- 512 GB DDR4 ECC memory supports demanding virtualization workloads
- 12 LFF drive bays accept 3.5 inch SATA storage up to 24 TB total
- PERC H730P RAID controller manages arrays with 2 GB cache
- iDRAC9 Enterprise enables remote management and firmware updates
Caractéristiques
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.1 GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 512GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 24,00 |
| Storage Controller | Dell PERC H730P Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC9 - Enterprise License |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
What server rails or rack depth do I need to mount this 36-inch deep R740xd?
The chassis measures 36 inches deep, so you will need a rack at least that deep and a compatible Dell rail kit for a 2U server.
Will my existing 3.5-inch SATA drives work with the PERC H730P controller in this 12-bay chassis?
Yes, the PERC H730P supports SATA drives and the chassis provides 12 hot-plug 3.5-inch bays for them.
How can I confirm both Xeon Gold 5218R processors and all 512 GB of DDR4 memory are detected after power-on?
Check the iDRAC9 Enterprise interface or the BIOS System Information page; both should list two CPUs and 512 GB total memory.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
