DELL
DELL PowerEdge R740xd 12LFF 2x Xeon Gold 6152 2.1GHz 32GB DDR4 No Drive Rack Server
A 12-bay 3.5-inch rack server with dual Xeon Gold 6152 22-core processors, 32 GB DDR4 ECC memory and a PERC H730P RAID controller, sold without drives
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.1 GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size32GB
- 12 x 3.5" drive bays for high-capacity storage
- Dual Xeon Gold 6152 processors at 2.1 GHz with 22 cores each
- 32 GB DDR4 ECC registered memory installed
- PERC H730P RAID controller for data protection
- iDRAC9 Enterprise remote management included
Dell PowerEdge R740xd 12-Bay Rack Server
The Dell PowerEdge R740xd is a 2U rack-mount server system built for dense local storage. It ships with two Intel Xeon Gold 6152 processors running at 2.10 GHz, each delivering 22 cores and 30.25 MB of cache. The system includes 32 GB of DDR4 ECC registered memory in a two-module configuration and a PERC H730P RAID controller. No hard drives are installed, leaving the twelve 3.5-inch drive bays available for SATA media.
Suited for storage-heavy workloads, not GPU compute
This configuration targets buyers who need high internal capacity for backup, archival or software-defined storage clusters. The dual-socket design and 3 TB maximum memory ceiling also support virtualisation hosts with moderate core counts. Organisations that require dedicated GPU acceleration or more than two processor sockets should evaluate other platforms.
Twelve 3.5-inch bays define the storage ceiling
The single specification that decides fit is the twelve-bay 3.5-inch chassis, which sets the absolute limit for raw drive count. With SATA interfaces and the H730P controller, the array topology and usable capacity depend entirely on the drives you populate. Buyers who need more than twelve spindles or a different form factor must choose a different chassis.
Points forts
- 12 x 3.5" drive bays for high-capacity storage
- Dual Xeon Gold 6152 processors at 2.1 GHz with 22 cores each
- 32 GB DDR4 ECC registered memory installed
- PERC H730P RAID controller for data protection
- iDRAC9 Enterprise remote management included
Caractéristiques
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.1 GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 32GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 2,00 |
| Storage Controller | Dell PERC H730P Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC9 - Enterprise License |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
How many 3.5" drive bays does the 12LFF chassis provide?
The chassis supports up to 12 bays for 3.5" SATA drives, though no drives are installed in this configuration.
What is the correct sequence for installing the two Xeon Gold 6152 processors and the 32GB DDR4 memory?
Seat each 22‑core Xeon Gold 6152 into its socket, then populate the two 16GB DDR4 modules in the corresponding memory channels per CPU.
When should the PERC H730P RAID controller battery be checked or replaced?
The controller uses a backup battery for cache protection; plan to inspect it during routine server maintenance and replace it if the iDRAC9 reports a degraded or failed status.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



