DELL
DELL PowerEdge R740xd 12LFF 2x Xeon Silver 4110 128GB DDR4 rack server
A 12-bay 3.5" rack server with dual Xeon Silver 4110 CPUs, 128GB DDR4, and a PERC H730P controller
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.1GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size128GB
- Dual Xeon Silver 4110 processors at 2.1GHz deliver multi-threaded performance for virtualised workloads
- 128GB DDR4 ECC memory supports large datasets and multiple simultaneous virtual machines
- 12 x 3.5-inch drive bays with PERC H730P RAID controller enable high-capacity storage arrays
- iDRAC9 Enterprise remote management provides out-of-band monitoring and control
- Dual 1100W power supplies with 10GbE 562T adapter ensure resilient power and network connectivity
Dense 3.5-inch storage server
The Dell PowerEdge R740xd chassis holds twelve 3.5-inch drive bays and ships with two Xeon Silver 4110 processors at 2.1GHz plus 128GB of DDR4 ECC registered memory. A PERC H730P RAID controller and a 10GbE two-port 562T adapter are installed, while iDRAC9 Enterprise provides full remote management. Dual 1100W power supplies complete the baseline configuration.
Suits storage-heavy workloads
This platform fits organisations that need high local capacity in a 2U rack footprint — think backup targets, media archives or software-defined storage clusters. Buyers who require GPU acceleration or a smaller tower form factor should evaluate other platforms that match those specific requirements. The twelve-bay limit also means environments planning larger single-volume arrays must look beyond this chassis.
Twelve 3.5-inch bays define capacity
The maximum number of 3.5-inch drives the chassis can accept is the single figure that determines whether the server meets a given storage plan. With twelve bays populated by large-capacity SATA drives, raw capacity scales linearly; fewer bays would restrict total terabytes, while a 2.5-inch chassis would change drive economics entirely.
Points forts
- Dual Xeon Silver 4110 processors at 2.1GHz deliver multi-threaded performance for virtualised workloads
- 128GB DDR4 ECC memory supports large datasets and multiple simultaneous virtual machines
- 12 x 3.5-inch drive bays with PERC H730P RAID controller enable high-capacity storage arrays
- iDRAC9 Enterprise remote management provides out-of-band monitoring and control
- Dual 1100W power supplies with 10GbE 562T adapter ensure resilient power and network connectivity
Caractéristiques
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.1GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 128GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 48,00 |
| Storage Controller | Dell PERC H730P Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC9 - Enterprise License |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
What 3.5" drives must I supply to fill the 12 front bays?
The chassis accepts twelve 3.5" SATA drives; the PERC H730P controller manages them in any RAID level you configure.
Will my existing DDR4 ECC RDIMMs work with the two Xeon Silver 4110 CPUs already installed?
Yes, the system runs DDR4 ECC registered memory at 2.1 GHz processor speed; the 128 GB installed uses the same specification.
How do I confirm the PERC H730P and iDRAC9 are healthy after first boot?
Open the iDRAC9 web interface — it shows controller firmware version, drive status, and a green system-health indicator when all components pass POST.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



