DELL
DELL PowerEdge R740xd 12LFF 2x Xeon Silver 4110 2.1GHz 1536GB DDR4 No Drive
A 12-bay 3.5-inch rack server with dual 2.1 GHz Xeon Silver 4110 processors, 1.5 TB DDR4 memory and a PERC H730P RAID controller, sold without drives
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.1GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size1.5TB
- Dual 8-core Xeon Silver 4110 CPUs at 2.1GHz for heavy workloads
- Massive 1536GB DDR4 ECC memory supports large databases
- 12 large-form-factor bays ready for 3.5" SATA drives
- PERC H730P RAID controller protects data integrity
- iDRAC9 Enterprise enables full remote management
12-bay 3.5-inch Rack Server
The Dell PowerEdge R740xd is a 2U rack-mount server built around twelve 3.5-inch drive bays. It ships with two Intel Xeon Silver 4110 processors running at 2.1GHz and 1.5TB of DDR4 ECC registered memory. A PERC H730P RAID controller and dual 1100W power supplies are installed. No hard drives are included in this configuration.
Suits storage-heavy workloads, not GPU compute
This platform fits organisations that need dense local storage for databases, backups or software-defined storage clusters. The twelve large-form-factor bays support high-capacity SATA drives. Buyers who require GPU acceleration for AI training, rendering or VDI should look at a different chassis because this unit only provides integrated graphics. The fixed two-socket design also limits vertical scaling beyond the installed CPUs.
1.5TB DDR4 ECC memory installed
The system arrives with 1.5TB of DDR4 ECC registered RAM populated across the available DIMM slots. This capacity supports large in-memory databases and heavy virtualisation workloads immediately. The board can accept up to 3TB total, so further expansion is possible if the application demands more memory than the factory configuration provides.
Points forts
- Dual 8-core Xeon Silver 4110 CPUs at 2.1GHz for heavy workloads
- Massive 1536GB DDR4 ECC memory supports large databases
- 12 large-form-factor bays ready for 3.5" SATA drives
- PERC H730P RAID controller protects data integrity
- iDRAC9 Enterprise enables full remote management
Caractéristiques
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.1GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 1.5TB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 6,00 |
| Storage Controller | Dell PERC H730P Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC9 - Enterprise License |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
What rack dimensions and weight capacity are required to mount this 36 x 24 x 10 in, 40 lb server?
The server measures 36 inches wide, 24 inches deep and 10 inches high and weighs 40 lb, so the rack must accommodate those dimensions and support that weight.
Can the PERC H730P RAID controller manage SATA drives that I already own?
Yes, the PERC H730P controller supports SATA drives, so existing SATA drives can be used in the 12 drive bays.
How do I confirm the iDRAC9 Enterprise remote management is active after setup?
Connect to the iDRAC9 interface over the network; the dashboard will show the Enterprise license status and allow full remote control.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
