DELL
DELL PowerEdge T630 16SFF 2x Xeon E5-2640 v3 64GB DDR4 No Drive rack server
Rack server with sixteen 2.5-inch bays, dual Xeon processors at 2.6GHz, 64GB DDR4 memory and PERC H730 SAS controller
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.6GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size64GB
- Dual Xeon E5-2640 v3 processors deliver 16 cores at 2.6GHz
- 64GB DDR4 ECC registered memory supports up to 1.5TB capacity
- PERC H730 SAS controller manages 16 hot-swap 2.5in drive bays
- Integrated iDRAC8 Enterprise enables remote management and monitoring
- Dual 1100W power supplies provide redundant power for uptime
16-bay 2.5-inch rack server
The Dell PowerEdge T630 fits a 2U rack footprint and accepts up to sixteen 2.5-inch drives. Two Xeon E5-2640 v3 processors running at 2.6GHz deliver sixteen cores and 20MB cache each. Sixty-four gigabytes of DDR4 ECC registered memory are installed and the platform can scale to 1.5TB. The PERC H730 SAS controller manages storage through SATA or SAS interfaces.
Suited for virtualisation hosts needing dense
This configuration targets workloads that benefit from high drive counts and dual-socket compute, such as hypervisor clusters or database nodes. Buyers who need a single-processor layout, fewer than sixteen bays, or a tower chassis should consider other form factors. Environments requiring integrated GPU acceleration beyond basic display output will also find the graphics capability limited.
PERC H730 SAS controller with SATA support
The installed Dell PERC H730 RAID controller governs all drive connectivity and RAID levels. Because the server ships without drives, the controller choice determines which 2.5-inch SAS or SATA media can be added and how many arrays are supported. Verify the controller feature set against the intended storage topology before ordering.
Points forts
- Dual Xeon E5-2640 v3 processors deliver 16 cores at 2.6GHz
- 64GB DDR4 ECC registered memory supports up to 1.5TB capacity
- PERC H730 SAS controller manages 16 hot-swap 2.5in drive bays
- Integrated iDRAC8 Enterprise enables remote management and monitoring
- Dual 1100W power supplies provide redundant power for uptime
Caractéristiques
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.6GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 64GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 1.5TB |
| Hard Drive (Installed) | 3.840,00 |
| Storage Controller | Dell PERC H730 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC8 - Enterprise License |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
How do I verify the PERC H730 controller and iDRAC8 Enterprise are functioning after first boot?
During POST the PERC H730 BIOS will list the 16 2.5-inch bays and any drives you install. iDRAC8 Enterprise activates its own IP address on the dedicated management port; log in there to confirm firmware version and remote console access.
What components ship inside the chassis and which items must I source separately?
The unit arrives with two Xeon E5-2640 v3 processors at 2.6GHz, 64GB DDR4 ECC registered memory, dual 1100W power supplies, the PERC H730 SAS controller, and a 1Gb 2-port 332T network adapter. No drives or rail kit are included.
Which memory configuration should I select if I plan to expand beyond the installed 64GB?
The board supports up to 1.5TB total using DDR4 ECC registered modules. Populate remaining DIMM slots in matched pairs per processor to maintain quad-channel performance.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
HPE
HPE P22020B21 2U Cable Management Arm for DL38X Gen10 Plus Rail Kit
52,99 $US67,99 $US−22%
0.00067734BTC
En stock
Lenovo
Lenovo ThinkSystem ST250 V3 7DCEA01YNA Tower Server Xeon E-2434 16 GB RAM
1 267,99 $US
0.01620787BTC
En stock