DELL
DELL ST1200MM0088 1.2TB 10K RPM 12Gb/s 2.5" SAS internal hard drive
A 1.2 TB SAS hard drive with 10,000 RPM speed for 2.5-inch server bays
- 2 TB capacity supports large enterprise workloads
- 10000 RPM spindle speed delivers fast data access
- 12 Gb/s SAS interface enables high-throughput transfers
- 5 inch form factor fits dense server bays
- New condition ensures full manufacturer specification compliance
1.2TB 10K RPM SAS enterprise drive
The Dell ST1200MM0088 is a 1.2TB 2.5-inch internal hard drive spinning at 10000 RPM with a 12Gb/s SAS interface. It is built for enterprise servers and storage arrays that require high-throughput, low-latency mechanical storage. The drive uses a standard 2.5-inch form factor for hot-swap bays. It is sold new in OEM or retail packaging that may vary.
Suited for 10K SAS bays.
This drive suits administrators populating 2.5-inch SAS drive bays in Dell PowerEdge or compatible servers needing 10K performance. It will not work in systems that lack a 12Gb/s SAS backplane or controller. Buyers needing larger capacities or solid-state speeds should consider other enterprise media. Home PC builders without SAS infrastructure cannot use this drive.
12Gb/s SAS interface decides compatibility
The single specification that determines fit is the 12Gb/s SAS interface. Your server or RAID controller must provide a native SAS 12Gb/s connection and 2.5-inch bay with appropriate cabling. Without a SAS host bus adapter or backplane, the drive cannot communicate or receive power. Verify the controller supports 12Gb/s SAS before purchase.
Points forts
- 2 TB capacity supports large enterprise workloads
- 10000 RPM spindle speed delivers fast data access
- 12 Gb/s SAS interface enables high-throughput transfers
- 5 inch form factor fits dense server bays
- New condition ensures full manufacturer specification compliance
Caractéristiques
Aucune caractéristique publiée pour cet article pour l’instant.
Questions sur cet article
Does the 2.5" SAS drive ship with a mounting bracket or caddy for server bays?
The unit is supplied as a bare drive; a 2.5" SAS-compatible caddy or bracket must be sourced separately for hot-swap bays.
Is the 1.2TB 10K RPM model the right choice over lower-capacity 10K drives for a RAID array needing maximum throughput?
The 1.2TB capacity at 10,000 RPM delivers the highest sequential throughput in the 10K SAS line, making it the preferred spindle for performance RAID sets.
Will the 12Gb/s SAS interface actually run at 12Gb/s in a server backplane that only supports 6Gb/s?
The drive negotiates down to 6Gb/s automatically; it will operate reliably but at the backplane's lower signalling rate.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
