DELL
DELL Wyse 5070 E Intel Motherboard XR96H
Thin-client desktop motherboard with Intel Celeron/Pentium J5005, DDR4 SODIMM slots, M.2 and SATA storage, dual DisplayPort and Gigabit Ethernet
- CPU TypeMotherboard
- Ready for dual-display setups with two DisplayPort outputs
- Expands storage via M.2 slot and SATA connector for 2.5 drives
- Supports up to 8 GB DDR4 memory in dual-channel configuration
- Integrated Gigabit Ethernet provides wired network connectivity
- Includes USB 3.0, USB 2.0 and USB Type-C ports
Dell Wyse 5070 E Motherboard
The Dell Wyse 5070 E motherboard is a thin-client board built around an Intel Celeron or Pentium Silver J5005 processor. It fits the Wyse 5070 chassis and serves compact desktop or embedded workloads. The board provides dual DisplayPort outputs for multi-monitor setups and integrated Gigabit Ethernet for wired networking.
Compatibility Check Before Ordering
Verify that your existing Wyse 5070 unit matches the XR96H part number and the thin-client form factor. Confirm the installed processor is a supported J5005 variant and that the memory configuration uses DDR4 SODIMM modules within the 8 GB limit. Check whether your current storage uses a SATA 2.5 drive or an M.2 SSD to match the available connectors.
Build Integration Notes
The board supplies an M.2 slot for SSD storage and a SATA connector for 2.5 drives, freeing you to choose either format. A second M.2 slot accepts optional wireless cards for Wi-Fi and Bluetooth expansion. USB 3.0, USB 2.0 and a possible USB Type-C port handle peripherals, while integrated audio jacks cover microphone and headphone needs.
Points forts
- Ready for dual-display setups with two DisplayPort outputs
- Expands storage via M.2 slot and SATA connector for 2.5 drives
- Supports up to 8 GB DDR4 memory in dual-channel configuration
- Integrated Gigabit Ethernet provides wired network connectivity
- Includes USB 3.0, USB 2.0 and USB Type-C ports
Caractéristiques
| CPU Type | Motherboard |
|---|
Questions sur cet article
What comes with the XR96H motherboard and what must be sourced separately?
The board ships as a bare motherboard with the Intel Celeron/Pentium J5005 soldered on; you must add DDR4 SODIMM modules, an M.2 SSD or 2.5-inch SATA drive, and an optional M.2 wireless card yourself.
Which memory capacity should I choose for the two DDR4 SODIMM slots on this Wyse 5070 board?
Each slot takes a DDR4 SODIMM up to 8 GB; install a matched pair to enable dual-channel operation and reach the platform’s 8 GB total limit.
What does the dual DisplayPort output mean once the XR96H is installed in a Wyse 5070 chassis?
It provides two native DisplayPort connectors for driving two external monitors simultaneously from the integrated graphics of the J5005 processor.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



