Delta P
Delta P ADP-200CF 614-0428 212W 145W power supply for A1267 MB382 24" Cinema Display
Replacement 145 W power supply for 24 inch Cinema Display models A1267 and MB382
- Maximum Power145 W
- Fans0
- ModularNo
- Designed for the 24 inch Cinema Display A1267 MB382
- Delivers up to 145 watts continuous output
- Fanless design keeps operation completely silent
- Non-modular cabling simplifies internal routing
- Tested used unit rated at 85 percent new condition
ADP-200CF power supply for 24" Cinema Display
This ADP-200CF unit delivers 145 W maximum power to the A1267 MB382 24" Cinema Display. It is intended for owners replacing a failed or missing original adapter. The supply matches the 614-0428 part number and the 100-B1-0500-KR model reference. Buyers who need a different wattage or connector cannot use this unit.
Fanless sealed enclosure with fixed cable
The supply has no fans and a non-modular design, so the output cable is permanently attached. A sealed chassis reduces dust ingress and eliminates moving parts that could wear out. The fixed cable means the connector orientation cannot be changed, so desk routing must accommodate the existing plug direction. Units are used, tested good and rated about 85% new.
Silent operation within 145 W limit
With zero fans the unit runs completely silent during normal display use. Heat is dissipated passively through the enclosure while delivering up to 145 W. Power draw scales with panel brightness and content, staying inside the rated maximum. No active cooling noise is present in typical desktop environments.
Points forts
- Designed for the 24 inch Cinema Display A1267 MB382
- Delivers up to 145 watts continuous output
- Fanless design keeps operation completely silent
- Non-modular cabling simplifies internal routing
- Tested used unit rated at 85 percent new condition
Caractéristiques
| Maximum Power | 145 W |
|---|---|
| Fans | 0 |
| Modular | No |
Questions sur cet article
What is the 145 W maximum power rating and what load does it cap for the A1267 24" Cinema Display?
The 145 W rating is the continuous output limit that powers the A1267 24" Cinema Display logic board and backlight.
What physical connector and mounting does the ADP-200CF 614-0428 need to fit the MB382 chassis?
It uses the original rectangular plug and screw-mount tabs that align with the MB382 housing cut-outs.
How is the ADP-200CF installed in the A1267 and which step is often missed?
Remove the rear cover, slide the unit into the bay, secure the two mounting screws, then reconnect the DC plug — the screw step is frequently skipped.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



