Micron Technology, Inc.
Micron Technology, Inc. MT4JTF12864AZ-1G4D1 1GB DDR3 1333 Desktop RAM
- 1GB
- DDR3 1333 (PC3 1060…
$28.99
0.00037462BTC
En stock
Diablotek
Diablotek PSDA500 500 W power supply
A 500 W ATX unit with a single 12 V rail at 17 A, dual 80 mm fans and one 6+2-pin PCIe connector for mainstream builds
- TypeATX
- Maximum Power500 W
- Fans2 x 80mm fan
- Main Connector20+4Pin
- +12V RailsSingle
- PCI-Express Connector1 x 6+2-Pin
- Delivers 500 W for mainstream graphics cards
- Twin 80 mm fans move air quietly
- Single +12 V rail supplies 17 A for stable loads
- Four SATA connectors power multiple drives
- 20+4 pin main connector fits standard ATX builds
Diablotek DA Series 500 W ATX power supply
The Diablotek PSDA500 is a 500 W ATX power supply designed for entry-level and mainstream desktop builds. It provides a single +12 V rail rated at 17 A alongside +3.3 V and +5 V rails rated at 15 A each. Twin 80 mm fans move air through the unit to keep internal temperatures in check during normal operation. This unit suits builders assembling a new system or replacing a failed unit in a standard ATX chassis.
Check ATX case fit and connector needs before
Verify that the chassis accepts a standard ATX form factor measuring 5.8 inches by 6 inches by 3.5 inches. The main motherboard connector is a 20+4 pin design and a single 4-pin ATX 12 V plug is included for CPU power. Only one 6+2 pin PCI Express connector is provided so graphics cards requiring two such plugs cannot be powered. Four SATA power connectors and four peripheral connectors are available alongside a floppy connector for legacy devices.
Sustained load behaviour with twin 80 mm cooling
Under continuous load the single +12 V rail delivers up to 17 A while the minor rails hold at 15 A each within the 500 W total limit. The dual 80 mm fans run constantly to exhaust heat generated during prolonged operation. Input voltage switches between 115 V and 230 V at 50 or 60 Hz to match local mains supply. The unit does not carry an energy-efficient certification so efficiency under heavy sustained draw will be lower than certified designs.
Points forts
- Delivers 500 W for mainstream graphics cards
- Twin 80 mm fans move air quietly
- Single +12 V rail supplies 17 A for stable loads
- Four SATA connectors power multiple drives
- 20+4 pin main connector fits standard ATX builds
Caractéristiques
| Brand | Diablotek |
|---|---|
| Series | DA Series |
| Model | PSDA500 |
| Type | ATX |
| Maximum Power | 500 W |
| Fans | 2 x 80mm fan |
| Main Connector | 20+4Pin |
| +12V Rails | Single |
| PCI-Express Connector | 1 x 6+2-Pin |
| SATA Power Connector | 4 |
| Haswell Support | Yes |
| Input Voltage | 115 / 230 V |
| Input Frequency Range | 50/60 Hz |
| Input Current | 8A @ 115V, 5A @ 230V |
| Output | +3.3V@15A, +5V@15A, +12V@17A, [email protected] , [email protected] |
| Connectors | 1 x Main connector (20+4Pin) 1 x 4-Pin ATX 12V 1 x 6/8-Pin PCI-E 4 x Peripheral 4 x SATA 1 x Floppy |
| Energy-Efficient | No |
| Dimensions | 5.8" x 6" x 3.5" |
| Weight | 4 lbs. |
| Poids d’expédition | 1.39 kg |
| Dimensions du colis | 217 × 196 × 99 mm |
Questions sur cet article
Will the 500 W unit fit in a standard ATX case?
Yes, the supply follows the ATX form factor and measures 5.8" x 6" x 3.5", so it fits any standard ATX chassis.
What power connectors are included for drives and graphics cards?
The unit provides one 20+4-pin main connector, one 4-pin ATX 12 V, one 6+2-pin PCIe, four SATA and four peripheral connectors.
Can I use this PSU on both 115 V and 230 V mains?
Yes, the input voltage range is 115 / 230 V at 50/60 Hz, and the unit draws 8 A at 115 V or 5 A at 230 V.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
Kingston Technology Corp.
Kingston Technology Corp. KTD-DM8400A/512 512MB DDR2 desktop RAM
- 512MB
- CL4
$12.99
0.00016786BTC
En stock
