Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter

DigLucky

DigLucky NerdOCTaxe 3.1 12.0 TH/s SHA-256 Desktop Solo Miner

SKU CH-MZ72-VZT0D

A desktop solo miner delivering 12.0 TH/s SHA-256 hashing at 200W with integrated WiFi and dual-fan cooling under 40 dBA

  • Part#DL-OCTaxe12T
  • TypeDesktop Solo Miner
  • Crypto AlgorithmSHA-256
  • Compatible CurrencyBitcoin (BTC)
  • Mining HardwareASIC
  • Hashrate12.0 TH/s ±5%
  • 0 TH/s hashrate from eight BM1370 chips
  • 200 W power draw at 16.7 J/TH efficiency
  • 250 W industrial PSU with XT60 connector included
  • Built-in 2.4 GHz WiFi and 3.5″ display for standalone AxeOS control
  • Under 40 dBA noise for quiet desktop operation

Desktop Solo Miner for Bitcoin

The DigLucky NerdOCTaxe 3.1 is a desktop ASIC built for solo Bitcoin mining using the SHA-256 algorithm. It integrates eight BM1370 chips on a single hash board to deliver 12.0 TH/s at a rated 200W power draw. The unit ships with a 250W industrial power supply and runs the AxeOS interface over 2.4GHz WiFi without an external controller.

SHA-256 Hashrate and Power Limits

At 12.0 TH/s with a ±5% tolerance the miner targets individual block discovery rather than pool shares. Efficiency sits at roughly 16 J/TH, so the 200W ceiling is a hard practical limit for continuous operation. The 2.4GHz wireless link handles stratum traffic but cannot match wired latency for high-difficulty work. Ambient temperature must stay between 0°C and 35°C to avoid thermal throttling.

Upgrade from USB Stick Miners

This device replaces low-hashrate USB or single-chip miners that typically produce under 1 TH/s. The jump is justified when the operator wants a realistic chance at solo blocks and accepts 200W continuous draw. Noise stays below 65 dB, making it viable for office or home use where older industrial units would be impractical.

Points forts

  • 0 TH/s hashrate from eight BM1370 chips
  • 200 W power draw at 16.7 J/TH efficiency
  • 250 W industrial PSU with XT60 connector included
  • Built-in 2.4 GHz WiFi and 3.5″ display for standalone AxeOS control
  • Under 40 dBA noise for quiet desktop operation

Caractéristiques

BrandDiglucky
SeriesNerdOCTaxe
ModelNerdOCTaxe 3.1
Part#DL-OCTaxe12T
TypeDesktop Solo Miner
Crypto AlgorithmSHA-256
Compatible CurrencyBitcoin (BTC)
Mining HardwareASIC
Hashrate12.0 TH/s ±5%
Quantity of Hash Chips8x BM1370 Array
Hash Boards1
Network Connection2.4GHz WiFi (Standalone AxeOS Node)
Noise level< 65dB
FanDual-Fan High-CFM Active Air-Cooling
Power Supply250W Industrial High-Capacity Power Supply Included
Power Consumption200W ±10%
Power Efficiency~16 J/TH
Operation Temperature0°C - 35°C (32°F - 95°F)
Storage Temperature-20°C - 60°C (-4°F - 140°F)
Operation Humidity10% - 90% RH (Non-condensing)
Storage Humidity10% - 90% RH (Non-condensing)
Dimension20x 14x 20 cm
Weight1.3
Feature1. 12.0 TH/s EXTREME HASHRATE: Engineered for serious edge-node deployment, delivering a massive 12.0 TH/s (+/- 5%) cryptographic output to dominate desktop solo mining.
2. 200W OPTIMIZED EFFICIENCY: Achieves enterprise-tier hash density while drawing only 200W (+/- 10%) under continuous load. Maximize your compute power without requiring expensive electrical upgrades.
3. ADVANCED THERMAL CONTROL: Equipped with a heavy-duty dissipation architecture and high-speed PWM active cooling. The system auto-calibrates based on real-time silicon telemetry to prevent thermal throttling during 2
Package Content1x DigLucky NerdOCTaxe 3.1 Miner, 1x 250W Industrial Power Supply, 1x US Standard AC Cable

Questions sur cet article

What power supply is required to run the miner?

A 250W industrial switching power supply with an XT60 interface is included in the box, so no separate PSU purchase is needed.

How loud is the unit during normal operation?

The dual-fan cooling system keeps typical noise below 40 dBA, which is quiet enough for a desktop or home office environment.

Does the miner need a separate computer to configure the mining pool?

No, it runs AxeOS with built-in 2.4GHz WiFi and a 3.5-inch display, letting you set up the stratum pool directly from the web console.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.