Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Dynatron TL37 2U liquid cooler with 12 x 3.2 x 3.3 inch radiator

Dynatron

Dynatron TL37 2U Liquid CPU Cooler SP5 500W

SKU CH-5F3T-955EJ MPN TL37

2U liquid cooler for AMD EPYC Genoa SP5 sockets, dissipating up to 500W at 40°C with a 3.2 L/min pump and pre-applied Shin-Etsu 8192 thermal grease

  • Supports AMD EPYC Genoa SP5 processors up to 500 W heat dissipation at 40 C
  • 2 L/min pump flow rate keeps coolant moving through the 2U radiator
  • Pre-applied Shin-Etsu 8192 thermal grease ensures immediate thermal contact
  • Compact 12 x 3.2 x 3.3 inch radiator fits standard 2U server chassis
  • All-in-one liquid design removes CPU heat without custom loop complexity

AMD EPYC Genoa SP5 liquid cooler

The Dynatron TL37 is an all-in-one liquid cooler built for AMD EPYC Genoa processors using the SP5 socket. It fits a 2U server chassis and is rated to dissipate up to 500W of heat at a 40 C ambient temperature. This unit targets operators running high-density compute nodes where air cooling cannot meet the thermal envelope.

500W heat dissipation at 40 C

The cooler handles sustained 500W loads while the inlet air remains at 40 C, giving headroom for heavily loaded EPYC Genoa CPUs. Beyond that power level or at higher ambient temperatures the thermal margin narrows and throttling may occur. The integrated pump delivers a flow rate of 3.2 litres per minute to move heat toward the radiator.

Pre-applied Shin-Etsu 8192 thermal grease

Shin-Etsu 8192 compound is already applied to the cold plate, removing the need for separate paste application during installation. This saves time in rack build-outs and ensures a consistent interface layer. No additional mounting hardware or software utilities are mentioned in the supplied data.

Points forts

  • Supports AMD EPYC Genoa SP5 processors up to 500 W heat dissipation at 40 C
  • 2 L/min pump flow rate keeps coolant moving through the 2U radiator
  • Pre-applied Shin-Etsu 8192 thermal grease ensures immediate thermal contact
  • Compact 12 x 3.2 x 3.3 inch radiator fits standard 2U server chassis
  • All-in-one liquid design removes CPU heat without custom loop complexity

Caractéristiques

Aucune caractéristique publiée pour cet article pour l’instant.

Questions sur cet article

Will the TL37 clear the DIMM slots and PCIe cards on my existing SP5 motherboard?

The 12 inch long radiator and 2U height are designed for dense SP5 layouts; verify your board's keep-out zone against the 3.2 inch radiator width before installing.

How can I confirm the pump is circulating coolant at the rated 3.2 LPM after installation?

Monitor CPU temperature under load — sustained operation below 40 °C at 500 W indicates the pump and cold plate are performing to spec.

Does the TL37 ship with mounting hardware for SP5 and is thermal paste included?

The cooler arrives with SP5 mounting brackets and Shin-Etsu 8192 grease pre-applied to the cold plate; no extra paste or brackets are required.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.