E-POWER
E-POWER EP-550PM 550W ATX/EPS12V power supply 120mm fan
Delivers 550 W through a 120 mm fan-cooled ATX/EPS12V unit with 20+4 pin, 4+4 pin, two PCI-E 6+2 pin and six SATA connectors
- ColorBlack
- TypeATX 12V / EPS 12V
- Maximum Power550 W
- Fans1
- Main Connector20+4 Pin
- +12V Rails2
- Delivers 550 W for stable system operation
- 120 mm fan provides quiet cooling airflow
- Dual +12 V rails balance load across components
- Two PCI-E 6+2 pin connectors power modern graphics cards
- Six SATA connectors support multiple storage drives
550W ATX/EPS12V supply for standard builds
The E-POWER EP-550PM delivers 550 W through dual +12 V rails and a 120 mm fan. It fits ATX and EPS12V systems that need a 20+4 pin main connector, a 4+4 pin CPU connector, two PCI-E 6+2 pin connectors, six SATA connectors, six Molex connectors and one FDD connector. The non-modular design keeps cabling simple for first-time builders.
Replaces older units below 550 W
Upgrading makes sense when a current supply cannot feed a mid-range graphics card or when a system restarts under load. The dual +12 V layout spreads current more evenly than many legacy single-rail units. Efficiency sits above 75 percent, so the jump is worth it for builds that run near the 550 W ceiling for extended periods.
Straightforward ATX installation with fixed cables
Mount the 150 x 140 x 86 mm chassis with four standard screws and connect the 24 pin, 4+4 pin and PCI-E leads directly. The fixed cable bundle cannot be reduced, so route unused Molex and FDD leads behind the motherboard tray. Verify that the 140 mm depth clears your case before fitting.
Points forts
- Delivers 550 W for stable system operation
- 120 mm fan provides quiet cooling airflow
- Dual +12 V rails balance load across components
- Two PCI-E 6+2 pin connectors power modern graphics cards
- Six SATA connectors support multiple storage drives
Caractéristiques
| Brand | ePOWER |
|---|---|
| Series | PM |
| Model | EP-550PM |
| Color | Black |
| Type | ATX 12V / EPS 12V |
| Maximum Power | 550 W |
| Fans | 1 |
| Main Connector | 20+4 Pin |
| +12V Rails | 2 |
| PCI-Express Connector | 2 x 6+2 Pin |
| SATA Power Connector | 6 |
| Max PSU Length | 140 mm |
| Modular | No |
| Efficiency | > 75% |
| Input Voltage | 115 / 230 V |
| Input Frequency Range | 50/60 Hz |
| Connectors | 1 x 24 pin (20+4) ATX |
| Power Rating | 550W |
| Dimensions | 150 x 140 x 86 mm |
| Weight | 4 |
| Input Current | 8A @ 115V, 4A @ 230V |
| +3.3V Max. Current | 24A |
| +5V Max. Current | 24A |
| +12V1 Max. Current | 20A |
| +12V2 Max. Current | 20A |
| -12V Max. Current | 0.5A |
| +5VSB Max. Current | 2.5A |
| 12V Power Connector | 1 x 4+4 Pin ATX/EPS 12V |
| Floppy Connector | 1 |
| Peripheral Connector | 6 |
| Fans Total Quantity | 1 |
| Top Fans Size | 120mm |
Questions sur cet article
Will the 140 mm length fit inside my case?
The unit measures 150 mm deep by 140 mm wide by 86 mm high. Check your case clearance for those dimensions before buying.
Does it provide enough PCIe power for a mid-range graphics card?
Two 6+2 pin PCIe connectors are included, each capable of delivering up to 150 W on the 12 V rails.
Is the main motherboard connector compatible with both 20 pin and 24 pin sockets?
Yes, the 20+4 pin design splits to fit either legacy 20 pin or modern 24 pin ATX headers.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



