Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Blue semi-flexible TPU filament spool, 2.85 mm diameter, 500 g weight

E3D Online

E3D Online FleXD Semi-flexible TPU Filament 2.85mm 500g Oxford Blue 3d printers accessory

SKU CH-R9BP-BGECS

Semi-flexible TPU filament in 2.85 mm diameter, 500 g spool, prints at 220-240 °C bed 45-85 °C with high abrasion resistance and rich Oxford Blue colour

  • ColorBlue
  • TypeFilament
  • Easy to print at 15 mm/s with 220–240 °C nozzle and 45–85 °C bed
  • High abrasion resistance for durable functional parts
  • High shear strength handles mechanical stress
  • Elastic and flexible with rich, solid Oxford Blue color
  • Compatible with water-soluble Scaffold support for clean overhangs

E3D FleXD Semi-flexible TPU Filament 2.85mm

This Oxford Blue filament is a semi-flexible TPU designed for 3D printers that accept 2.85mm material. It suits makers who want elastic, abrasion-resistant parts with a rich, solid colour and high shear strength.

Print temperature range 220-240°C and bed 45-85°C

The material prints at 220-240°C with a heated bed between 45°C and 85°C. A slow feed rate of roughly 15mm/s — about 30% of typical speed — is required, and a glue stick on the bed helps adhesion.

Check your printer takes 2.85mm filament

Verify that the extruder and hotend support 2.85mm diameter filament and that the firmware can sustain a print speed around 15mm/s. Confirm the heated bed reaches at least 45°C and the hotend reaches 220°C before ordering.

Points forts

  • Easy to print at 15 mm/s with 220–240 °C nozzle and 45–85 °C bed
  • High abrasion resistance for durable functional parts
  • High shear strength handles mechanical stress
  • Elastic and flexible with rich, solid Oxford Blue color
  • Compatible with water-soluble Scaffold support for clean overhangs

Caractéristiques

BrandE3D
ModelFleXD
ColorBlue
TypeFilament

Questions sur cet article

Is the 2.85 mm diameter and 500 g spool the only option for this FleXD filament?

Yes, this listing is for the 2.85 mm diameter supplied on a 500 g spool in Oxford Blue.

What do the 220–240 °C nozzle and 45–85 °C bed temperatures mean for everyday printing?

They are the recommended operating window; start near the middle of each range and adjust for your specific printer.

How does the 30 % speed guideline of 15 mm/s affect print time and quality?

Printing at 15 mm/s slows output but greatly improves layer adhesion and dimensional accuracy with this flexible material.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.