EVGA
EVGA GeForce GTX 590 Classified 3GB graphics card
Dual-GPU Fermi card with 3 GB GDDR5 on a 768-bit bus, 1 024 CUDA cores at 630 MHz core and 1 242 MHz shader clocks, PCIe 2.0 x16, DirectX 11 and OpenGL 4.1, plus Mini DisplayPort and three DVI
- InterfacePCI Express 2.0 x16
- Chipset ManufacturerNVIDIA
- GPU SeriesNVIDIA GeForce GTX 500 Series
- GPUGeForce GTX 590 (Fermi)
- Core Clock630 MHz
- Shader Clock1242 MHz
- Dual GPU design with 1024 CUDA cores for parallel workloads
- 3GB GDDR5 memory on a 768-bit bus for high bandwidth
- Core clock at 630 MHz and shader clock at 1242 MHz
- DirectX 11 and OpenGL 4.1 support for modern APIs
- Mini DisplayPort plus three DVI outputs for multi-display setups
Dual-GPU GTX 590 Classified 3GB
The EVGA GeForce GTX 590 Classified combines two Fermi GPUs on a single PCI Express 2.0 x16 card. It delivers 1024 CUDA cores split across the pair, clocked at 630 MHz core and 1242 MHz shader. Three gigabytes of GDDR5 memory run on a 768-bit bus at an effective 3456 MHz. The board supports DirectX 11 and OpenGL 4.1 for compatible titles.
Built for multi-monitor SLI rigs
This card suits enthusiasts running NVIDIA 3D Vision Surround across three DVI outputs or the Mini DisplayPort. SLI support allows a second GTX 590 for quad-GPU scaling. Builders needing modern display connectors, lower power draw, or single-GPU driver simplicity should consider newer architectures instead.
768-bit memory interface decides fit
The 768-bit bus feeds both GPUs simultaneously, defining bandwidth for high-resolution textures at 2560 x 1600. If your workload demands that specific bus width and the 3 GB frame buffer, the Classified matches the requirement. Any other memory configuration will not provide the same dual-GPU balance.
Points forts
- Dual GPU design with 1024 CUDA cores for parallel workloads
- 3GB GDDR5 memory on a 768-bit bus for high bandwidth
- Core clock at 630 MHz and shader clock at 1242 MHz
- DirectX 11 and OpenGL 4.1 support for modern APIs
- Mini DisplayPort plus three DVI outputs for multi-display setups
Caractéristiques
| Brand | EVGA |
|---|---|
| Series | DUAL GPU |
| Model | 03G-P3-1596-AR |
| Interface | PCI Express 2.0 x16 |
| Chipset Manufacturer | NVIDIA |
| GPU Series | NVIDIA GeForce GTX 500 Series |
| GPU | GeForce GTX 590 (Fermi) |
| Core Clock | 630 MHz |
| Shader Clock | 1242 MHz |
| CUDA Cores | 1024 (512 x 2) |
| Effective Memory Clock | 3456MHz |
| Memory Size | 3GB |
| Memory Interface | 768-Bit |
| Memory Type | GDDR5 |
| DirectX | DirectX 11 |
| OpenGL | OpenGL 4.1 |
| DisplayPort | 1 x Mini DisplayPort |
| DVI | 3 x DVI |
| RAMDAC | 400MHz |
| Max Resolution | 2560 x 1600 |
| 3D VISION Game Ready | Yes |
| SLI Support | 4-Way SLI |
| Cooler | With Fan |
| Power Connector | 2 x 8-Pin |
| Dual-Link DVI Supported | Yes |
| HDCP Ready | Yes |
| Slot Width | 2 Slots |
| Package Contents | GPU ONLY |
Questions sur cet article
Does this dual-GPU card need two PCIe power connectors?
The card draws power through a single PCI Express 2.0 x16 slot and its own onboard connectors; check your power supply for the required 6-pin or 8-pin leads.
Will the 768-bit memory bus and 3 GB GDDR5 handle 2560 x 1600 on a single monitor?
Yes, the 768-bit interface with 3072 MB of GDDR5 supports a maximum digital resolution of 2560 x 1600.
Can I run three displays using the three DVI ports and the Mini DisplayPort together?
The card provides three DVI outputs and one Mini DisplayPort; NVIDIA Surround can drive three simultaneous displays from these connectors.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



