G.SKILL
G.SKILL F5-6400J3239G16GA2-TZ5RK 32GB (2×16GB) DDR5 6400MT/s CL32 desktop RAM
32GB dual-channel DDR5 kit with two 16GB modules rated 6400MT/s CL32-39-39-102 at 1.40V and Intel XMP 3.0
- Capacity32GB
- Speed6400
- CAS LatencyCL32
- Timing32-39-39-102
- Multi-channel KitDual Channel Kit
- ChipsetMajor Brand Chipset
- 32 GB dual-channel kit for high-capacity multitasking
- DDR5-6400 speed for fast data throughput
- CL32-39-39-102 timings tuned for low latency
- 40 V operation within Intel XMP 3.0 profile
- 288-pin U-DIMM fits standard desktop slots
Trident Z5 RGB 32GB DDR5 kit
This 32GB kit contains two 16GB DDR5 U-DIMM modules rated for 6400MT/s with timings of 32-39-39-102 at 1.40V. It includes both a JEDEC default profile and an Intel XMP 3.0 overclock profile for compatible platforms. The matte black finish and RGB lighting suit builds where visual coordination matters. Non-ECC unbuffered design targets consumer desktop use.
Builders on Intel Z890 Z790 B860 B760 platforms
The kit is validated for Intel Z890, Z790, B860 and B760 platforms; users on other chipsets should verify compatibility before purchase. Mixing this kit with any other memory modules is not supported and can cause stability issues or system failure. Systems requiring ECC error correction or registered DIMMs must look elsewhere. Capacity is fixed at 32GB across two slots.
6400MT/s CL32 dual-channel speed
The single specification that decides fit is the rated 6400MT/s CL32-39-39-102 operation at 1.40V via Intel XMP 3.0. If the target platform cannot enable this XMP profile or does not support the voltage, the modules will fall back to JEDEC speeds. Buyers needing different frequencies, latencies or voltages should select another kit.
Points forts
- 32 GB dual-channel kit for high-capacity multitasking
- DDR5-6400 speed for fast data throughput
- CL32-39-39-102 timings tuned for low latency
- 40 V operation within Intel XMP 3.0 profile
- 288-pin U-DIMM fits standard desktop slots
Caractéristiques
| Brand | Trident |
|---|---|
| Series | Z |
| Capacity | 32GB |
| Speed | 6400 |
| CAS Latency | CL32 |
| Timing | 32-39-39-102 |
| Multi-channel Kit | Dual Channel Kit |
| Chipset | Major Brand Chipset |
Questions sur cet article
What DDR5 speed and latency does the XMP 3.0 profile set on this 32GB kit?
The Intel XMP 3.0 profile configures the kit to run at DDR5-6400 with timings of CL32-39-39-102 at 1.40V.
What physical slot and module count does this 32GB dual-channel kit require?
It uses two 288-pin U-DIMM modules, each 16GB, installed in the motherboard's dual-channel DDR5 slots.
How do you enable the rated 6400MT/s speed, and what step is often missed?
Enter the BIOS and enable the Intel XMP 3.0 profile; the common mistake is leaving the kit at JEDEC defaults instead of activating XMP.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



