G.SKILL
G.SKILL Flare X5 32GB DDR5 6000MHz CL32 1.35V Matte Black desktop RAM
A 32GB DDR5 dual-channel kit running at 6000MHz with CL32 timings and 1.35V, built for AMD EXPO overclocking in a 33mm low-profile design
- Capacity32GB
- Voltage1.35V
- 32 GB capacity from two 16 GB modules
- AMD EXPO profile enables one-step memory overclocking
- CL32 latency with 32-38-38-96 timings
- Low 1.35 V operating voltage for efficiency
- 33 mm low-profile height fits large CPU coolers
AMD EXPO DDR5 Kit
This 32GB dual-channel kit contains two 16GB DDR5 modules rated at 6000MHz with CL32 latency. It is built for AMD AM5 platforms and uses AMD EXPO profiles for one-step memory overclocking in the BIOS. Hand-screened ICs and G.SKILL validation target reliable high-speed operation.
Low-Profile Thermals
The matte black heatspreader stands 33mm tall, leaving clearance for large CPU coolers and compact cases. Operating at 1.35V keeps power draw modest during normal workloads. No active cooling is required, so the kit adds no fan noise to the system.
EXPO Profile Benefits
Enabling AMD EXPO in a compatible BIOS automatically applies the rated 6000MHz speed and 32-38-38-96 timings without manual tuning. This removes the trial-and-error of traditional overclocking and delivers the advertised performance immediately. The minimalist anodised finish suits a range of build themes.
Points forts
- 32 GB capacity from two 16 GB modules
- AMD EXPO profile enables one-step memory overclocking
- CL32 latency with 32-38-38-96 timings
- Low 1.35 V operating voltage for efficiency
- 33 mm low-profile height fits large CPU coolers
Caractéristiques
| Capacity | 32GB |
|---|---|
| Voltage | 1.35V |
Questions sur cet article
How do I install the 33mm low-profile modules and enable the AMD EXPO profile?
Seat each 16GB stick firmly until the retention clips click; the 33mm height clears most large CPU coolers. Enter the BIOS on your AM5 board and enable the AMD EXPO profile to run at 6000MHz CL32 1.35V.
What maintenance or replacement will the 32GB DDR5 kit need later?
No routine maintenance is required; keep the heatspreader fins dust-free with occasional compressed air. If a module fails, replace the full 2x16GB kit to preserve the matched 32-38-38-96 timings and EXPO profile.
What limit appears first during sustained heavy workloads?
The 1.35V operating voltage and CL32 32-38-38-96 timings are validated for continuous 6000MHz operation; the first limit is the DDR5 specification ceiling, not thermal throttling, thanks to the low-profile heatspreader.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
segotep 850W ATX 3.1 PCIe 5.1 80 Plus Gold Full Modular power supply
- ATX 3.1 Compatible
- 20+4 Pin



