GIANTARM GEEETECH LT156 405nm UV Curing Light 60W 3D Printers Accessory
A 405 nm UV LED lamp delivers 60 W output to cure SLA, DLP or LCD resin prints in 10 to 15 seconds at 5 cm distance, with an adjustable-angle bracket for flexible positioning
- Colorgrey
- TypeUV light
- Compatible SystemHigh power output with low consumption, fast curing time, an
- SpecificationHigh power output with low consumption, fast curing time, an
- FeaturesHigh power output with low consumption, fast curing time, an
- Cures resin in 10 to 15 seconds at 5 cm distance with six 405 nm LEDs
- 60 W equivalent output while consuming only 6 W for energy-efficient operation
- Adjustable bracket allows multiple curing angles for varied print geometries
- Compact footprint of 115 by 85 by 90 mm fits small workspaces
- Suitable for SLA, DLP and LCD resin prints plus DIY curing tasks
UV curing light for resin printers
The GIANTARM GEEETECH LT156 is a 405nm UV LED accessory designed for SLA, DLP and LCD 3D printing. It provides a 60W equivalent output while drawing only 6W, targeting makers who need fast post-curing of photosensitive resin models. The unit suits hobbyists and small workshops that cure prints on a bench rather than inside a dedicated station.
10 to 15 second cure at 5cm distance
Six high-power 405nm lamps deliver rapid solidification; the supplier notes resin can cure in 10 to 15 seconds from a 5cm distance. Thicker parts require longer exposure, so the light handles thin-walled models comfortably but runs out of speed on bulky geometries. The adjustable rear bracket lets you tilt the 115 by 85 by 90mm head to match part orientation.
Replaces slower single-lamp UV torches
This light upgrades from basic UV torches or low-power nail lamps that take minutes per layer. The jump is worth it when throughput matters — batch-curing multiple small parts or reducing wait time between prints. It does not replace a sealed wash-and-cure station for users who need contained washing, automated rotation or fume management.
Points forts
- Cures resin in 10 to 15 seconds at 5 cm distance with six 405 nm LEDs
- 60 W equivalent output while consuming only 6 W for energy-efficient operation
- Adjustable bracket allows multiple curing angles for varied print geometries
- Compact footprint of 115 by 85 by 90 mm fits small workspaces
- Suitable for SLA, DLP and LCD resin prints plus DIY curing tasks
Caractéristiques
| Brand | GIANTARM, GEEETECH |
|---|---|
| Model | LT156 |
| Part Number | GIANTARM-LT156 |
| Color | grey |
| Type | UV light |
| Compatible System | High power output with low consumption, fast curing time, and adjustable angle for 3D printing applications |
| Specification | High power output with low consumption, fast curing time, and adjustable angle for 3D printing applications |
| Features | High power output with low consumption, fast curing time, and adjustable angle for 3D printing applications |
Questions sur cet article
Will the LT156's 405nm UV output work with resin printed on my older SLA or DLP machine?
Yes, the light is designed for SLA, DLP and LCD 3D printing and cures photosensitive resin in 10-15 seconds at a 5 cm distance.
How can I confirm the LT156 is curing properly once I set it up?
Place a test part 5 cm from the six 405nm LEDs; it should solidify in 10-15 seconds, though thicker parts need more time.
What comes in the box with the GIANTARM GEEETECH LT156 and what must I buy separately?
The unit includes the 115x85x90 mm adjustable-angle UV light; eye protection is required but not supplied.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
VEVOR
VEVOR TLM-2310-S Hat Heat Press 580W 2 Platens White 3d printers accessory
- Other Appliances
83,99 $US
0.00106972BTC
En stock
eSUN eVacuum Kit Pro 2-US 10 bags 33 x 38cm 3d printers accessory
- Electric Vaccum Sto…
- Electronic Vacuum S…
31,99 $US
0.00040743BTC
En stock