GIGABYTE
GIGABYTE GA-970A-DS3P rev 2.0 AMD motherboard
ATX AMD 970 board with two PCIe x16 slots for CrossFire, DDR3 up to 2000 MHz, SATA 6 Gb/s, USB 3.0 and Ultra Durable protection
- CPU TypeAthlon / FX Series / Opteron / Phenom / Sempron
- Supports AMD FX and Phenom processors via AM3+ socket
- AMD 970 and SB950 chipset enables 2-way CrossFire graphics
- Ultra Durable design protects against humidity and power surges
- USB 3.0 and SATA 6Gb/s deliver fast data transfer
- On/Off Charge powers USB devices when system is off
AM3+ AMD 970 Motherboard
The GIGABYTE GA-970A-DS3P revision 2.0 is an ATX motherboard built around the AMD 970 north bridge and SB950 south bridge. It accepts AM3+ FX and AM3 series processors including Athlon, Phenom, Opteron and Sempron 100 Series CPUs. Ultra Durable components protect against humidity, power surges and electrostatic discharge, while dual BIOS adds recovery safety.
Builders using legacy AMD platforms
This board suits enthusiasts maintaining or upgrading an existing AM3 or AM3+ system who need 2-way CrossFire support and high-quality onboard audio with dedicated noise guard. Builders planning a new platform that requires a different socket, newer memory standards or integrated Wi-Fi should look elsewhere.
DDR3 2000 OC memory support
The motherboard runs DDR3 up to 2000 MHz when overclocked and 1866 MHz at standard speeds. If the planned memory kit exceeds this rating or uses a different memory type, the system will not operate correctly.
Points forts
- Supports AMD FX and Phenom processors via AM3+ socket
- AMD 970 and SB950 chipset enables 2-way CrossFire graphics
- Ultra Durable design protects against humidity and power surges
- USB 3.0 and SATA 6Gb/s deliver fast data transfer
- On/Off Charge powers USB devices when system is off
Caractéristiques
| CPU Type | Athlon / FX Series / Opteron / Phenom / Sempron |
|---|
Questions sur cet article
Which AMD socket CPUs are compatible with the GA-970A-DS3P rev 2.0?
The board supports AMD AM3+ FX series and AM3 series processors including Athlon, Phenom II, Athlon II and Sempron 100 Series.
Can I use my existing DDR3 memory with this motherboard?
Yes, it accepts DDR3 modules rated up to 1866 MHz and 2000 MHz when overclocked.
How do I verify the dual BIOS is functioning after assembly?
Enter the UEFI DualBIOS interface at boot; both main and backup BIOS versions should be visible and selectable.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



