GIGABYTE
GIGABYTE GA-B250M-HD3 Intel motherboard
Micro-ATX board for 6th and 7th generation Intel Core processors with dual-channel DDR4 up to 32 GB, M.2 slot and triple display outputs
- CPU TypeIntel Core 7th Gen (LGA 1151)
- Supports 7th and 6th generation Intel Core processors for broad CPU choice
- Dual-channel DDR4 with two DIMM slots scales to 32 GB system memory
- Ultra-fast M.2 slot with PCIe Gen3 x4 and SATA interface for quick storage
- Intel Optane Memory Ready to accelerate responsiveness with compatible modules
- Triple display outputs including HDMI for flexible multi-monitor setups
Socket LGA 1151 B250 motherboard
This GIGABYTE GA-B250M-HD3 board uses the Intel B250 Express Chipset and fits LGA 1151 processors from the 6th and 7th generation Core, Pentium and Celeron families. It targets builders who need a compact foundation for office or home systems without overclocking features.
Straightforward DDR4 installation with two slots
Two DDR4 DIMM sockets accept unbuffered non-ECC modules up to 32 GB total in dual-channel mode. Speeds of 2133 MHz work with any supported CPU, while 2400 MHz and XMP profiles require a 7th generation processor. The limited slot count makes population simple but caps maximum capacity.
32 GB dual-channel DDR4 ceiling
The four-lane M.2 connector and SATA ports share bandwidth, so adding a fast M.2 drive can disable some SATA ports. Maximum supported system memory is 32 GB across the two slots, which is the decisive figure for memory-heavy workloads.
Points forts
- Supports 7th and 6th generation Intel Core processors for broad CPU choice
- Dual-channel DDR4 with two DIMM slots scales to 32 GB system memory
- Ultra-fast M.2 slot with PCIe Gen3 x4 and SATA interface for quick storage
- Intel Optane Memory Ready to accelerate responsiveness with compatible modules
- Triple display outputs including HDMI for flexible multi-monitor setups
Caractéristiques
| Brand | GIGABYTE |
|---|---|
| Series | B250M-HD3 |
| CPU Type | Intel Core 7th Gen (LGA 1151) |
Questions sur cet article
How do I verify the motherboard is running correctly after assembly?
Power on the system and confirm the POST screen appears, then enter the BIOS to check that the installed processor is detected and the DDR4 memory shows the expected capacity and speed.
What comes in the box and what must I purchase separately?
The board includes the motherboard itself, I/O shield, SATA cables, driver disc and manual; you must buy a compatible LGA 1151 processor, DDR4 memory modules, storage drives and a power supply separately.
Which memory speed should I choose for this board?
Install DDR4 2133 MHz modules for guaranteed operation with any supported CPU; select DDR4 2400 MHz or XMP kits only if you are using a 7th generation processor.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



